期刊文献+

电除尘器中水雾雾化特性及对除尘性能的影响 被引量:4

THE EFFECT OF SPRAY ATOMIZATION CHARACTERISTICS IN WESP ON THE DUST REMOVAL
原文传递
导出
摘要 湿式电除尘器将水雾除尘与电除尘技术相结合,可以有效地对细颗粒物进行收集,抑制了二次扬尘的发生。通过研究电除尘器喷淋系统的雾化特性,以及不同供水压力对水雾荷电的影响,并测得其分级效率。研究结果表明:在供水压力为0.4 MPa时,湿式电除尘器的除尘效率大于99.5%;在喷雾粒径为100μm时,对10μm以下的细颗粒物除尘效率大于92%。通过分析,为湿式除尘器喷淋系统设计提供了依据。 The WESP is a combination of a spray dust estraction technique and the electric precipitation technology,which can effectively collect fine particles,inhibiting the second coming up of the dust. Through the study of electric dust collector spray system atomization characteristics,as well as the effect of different water pressure on the charging spray,it is measured its different efficiency. The research results show that at 0. 4 MPa of water delivery pressure,the WESP's efficiency is more than 99. 5%; at a droplet size of 100 μm,the WESP can remove fine particles smaller than 10 μm with an efficiency of more than 92%. Through the analysis,it is provided the basis for the spray system design of the WESP.
出处 《环境工程》 CAS CSCD 北大核心 2013年第S1期354-356,共3页 Environmental Engineering
关键词 雾化喷嘴 雾滴粒径 二次电流 除尘效率 spray nozzle droplet diameter secondary current dust removal rate
  • 相关文献

参考文献8

  • 1马素平,寇子明.喷雾降尘效率及喷雾参数匹配研究[J].中国安全科学学报,2006,16(5):84-88. 被引量:49
  • 2李会平,P.Tsakiropoulos.旋转盘离心雾化熔滴飞行动力学与凝固进程[J].中国有色金属学报,2006,16(5):793-799. 被引量:10
  • 3刘社育,蒋仲安,金龙哲.湿式除尘器除尘机理的理论分析[J].中国矿业大学学报,1998,27(1):47-50. 被引量:29
  • 4Vernon Cooray,Gerald Cooray.Electromagnetic radiation field of an electron avalanche[J].Atmospheric Research.2011
  • 5Hanguang Fu,Qiang Xiao,Jiandong Xing.A study of segregation mechanism in centrifugal cast high speed steel rolls[J].Materials Science & Engineering A.2007(1)
  • 6Morteza Eslamian,Joel Rak,Nasser Ashgriz.Preparation of aluminum/silicon carbide metal matrix composites using centrifugal atomization[J].Powder Technology.2007(1)
  • 7Wei-Hsin Chen,Shan-Wen Du,Tsung-Han Yang.Volatile release and particle formation characteristics of injected pulverized coal in blast furnaces[J].Energy Conversion and Management.2007(7)
  • 8é. P. Dreishner.Calculation and investigation of atomizers of centrifugal injectors[J].Chemical and Petroleum Engineering.1982(3)

二级参考文献21

  • 1马素平,寇子明.喷雾降尘机理的研究[J].煤炭学报,2005,30(3):297-300. 被引量:159
  • 2李华炜.煤矿呼吸性粉尘及其综合控制[J].中国安全科学学报,2005,15(7):67-69. 被引量:63
  • 3李会平.应用波理论预测旋转盘离心雾化膜状分裂区的粉末尺寸[J].粉末冶金工业,2006,16(1):17-21. 被引量:7
  • 4苏汝维.工业通风与防尘工程学[M].北京:北京经济学院出版社,1990..
  • 5马广大,除尘器性能计算,1990年,210页
  • 6井伊谷,除尘装置的性能,1988年,30页
  • 7稽敬文,除尘器,1981年,179页
  • 8Folio F,Lacour A.Centrifugal atomization of metallic alloys in inductive plasma onto cooled disc[J].Powder Metallurgy,2000,43(2):245-252.
  • 9Ozturk S,Arslan F.Production of rapidly solidified metal powders by water cooled rotating disc atomization[J].Powder Metallurgy,2001,44(2):171-176.
  • 10Labrecque C,Angers R,Tremblay R.Inverted disk centrifugal atomization of AZ91 Magnesium alloy[J].Canadian Metallurgical Quarterly,1997,36(3):169-175.

共引文献85

同被引文献35

引证文献4

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部