期刊文献+

Effect of Molecular Weight of PCL on the Structure and Mechanical Properties of PCL/PET Composite Vascular Scaffold Prototype

Effect of Molecular Weight of PCL on the Structure and Mechanical Properties of PCL/PET Composite Vascular Scaffold Prototype
下载PDF
导出
摘要 A new scaffold has been developed,which made from poly(ε-caprolactone)( PCL) membrane with porous structure,and reinforcement of PCL scaffold was achieved by embedding polyethylene terephthalate(PET) weft-knit tubular fabric. The aim of this paper is to study the variation tendency of the morphology and the mechanical properties of the sample with the changing of molecular weight. Weighing method was used to analyze the porosity of the sample,and scanning electron microscopy( SEM) images were taken to observe porous structure. The tensile and compressive strengths of the samples were tested by the universal mechanical tester and radial compression apparatus, respectively. And the results showed that the porosity and compressive strength were improved when increasing the molecular weight,and the elastic recovery rate was also improved slightly. However, molecular weight has little impact on the tensile strength properties,because the PET tubular fabric provides most of the strength support rather than PCL membrane. A new scaffold has been developed,which made from poly(ε-caprolactone)( PCL) membrane with porous structure,and reinforcement of PCL scaffold was achieved by embedding polyethylene terephthalate(PET) weft-knit tubular fabric. The aim of this paper is to study the variation tendency of the morphology and the mechanical properties of the sample with the changing of molecular weight. Weighing method was used to analyze the porosity of the sample,and scanning electron microscopy( SEM) images were taken to observe porous structure. The tensile and compressive strengths of the samples were tested by the universal mechanical tester and radial compression apparatus, respectively. And the results showed that the porosity and compressive strength were improved when increasing the molecular weight,and the elastic recovery rate was also improved slightly. However, molecular weight has little impact on the tensile strength properties,because the PET tubular fabric provides most of the strength support rather than PCL membrane.
出处 《Journal of Donghua University(English Edition)》 EI CAS 2013年第5期451-454,共4页 东华大学学报(英文版)
基金 Fundamental Research Funds for the Central Universities National Natural Science Foundation of China(No.31100682)
关键词 poly(ε-caprolactone)(PCL) molecular weight porous STRUCTURE MECHANICAL properties VASCULAR SCAFFOLD poly(ε-caprolactone)(PCL) molecular weight porous structure mechanical properties vascular scaffold
  • 相关文献

参考文献9

  • 1Qingchun Zhang,Yun Jiang,Yan Zhang,Zhaoyang Ye,Wensong Tan,Meidong Lang.Effect of porosity on long-term degradation of poly ( ε -caprolactone) scaffolds and their cellular response[J].Polymer Degradation and Stability.2013(1)
  • 2Weilin Xu,Fei Zhou,Chenxi Ouyang,Weigang Cui,Mu Yao,Xungai Wang.Small diameter Polyurethane vascular graft reinforced by elastic weft-knitted tubular fabric of polyester/spandex[J].Fibers and Polymers.2008(1)
  • 3Kee Woei Ng,Hosur N. Achuth,Shabbir Moochhala,Thiam Chye Lim,Dietmar W. Hutmacher.In vivo evaluation of an ultra-thin polycaprolactone film as a wound dressing[J].Journal of Biomaterials Science Polymer Edition.2007(7)
  • 4Yuqing Wan,Gang Feng,Francis H. Shen,Cato T. Laurencin,Xudong Li.Biphasic scaffold for annulus fibrosus tissue regeneration[J].Biomaterials.2007(6)
  • 5Z. Ge,J. C. H. Goh,L. Wang,E. P. S. Tan,E. H. Lee.Characterization of knitted polymeric scaffolds for potential use in ligament tissue engineering[J].Journal of Biomaterials Science Polymer Edition.2005(9)
  • 6Radoslaw Kowalewski,Lech Zimnoch,Marek Z. Wojtukiewicz,Jerzy Glowinski,Stanislaw Glowinski.Expression of fibrinolysis activators and their inhibitor in neointima of polyester vascular grafts[J].Biomaterials.2004(28)
  • 7David P. Faxon,Valentin Fuster,Peter Libby,Joshua A. Beckman,William R. Hiatt,Robert W. Thompson,James N. Topper,Brian H. Annex,John H. Rundback,Rosalind P. Fabunmi,Rose Marie Robertson,Joseph Loscalzo.Atherosclerotic Vascular Disease Conference: Writing Group III: Pathophysiology[J].Circulation: Journal of the American Heart Association.2004(21)
  • 8Ming-Hua Ho,Pei-Yun Kuo,Hsyue-Jen Hsieh,Tzu-Yang Hsien,Lein-Tuan Hou,Juin-Yih Lai,Da-Ming Wang.Preparation of porous scaffolds by using freeze-extraction and freeze-gelation methods[J].Biomaterials.2003(1)
  • 9Martina H.Stenzel‐Rosenbaum,Thomas P.Davis,Anthony G.Fane,VickiChen.Porous Polymer Films and Honeycomb Structures Made by the Self‐Organization of Well‐Defined Macromolecular Structures Created by Living Radical Polymerization Techniques[J].Angewandte Chemie International Edition.2001(18)

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部