期刊文献+

Application of entropy production theory to hydro-turbine hydraulic analysis 被引量:16

Application of entropy production theory to hydro-turbine hydraulic analysis
原文传递
导出
摘要 The understanding of hydraulic behavior in the hydro turbine requires the detailed study of fluid flow in the turbine. Previous methods of analyzing the numerical simulation results on the fluid machinery are short of intuitiveness on energy dissipation.In this paper, the energy dissipation was analyzed based on the entropy production theory. 3-D steady flow simulations and entropy production calculations of the reduced hydro turbine were carried out. The results indicated that the entropy production theory was suitable for evaluating the performance of the hydro turbine. The energy dissipation in the guide vanes area weighted nearly 25% of the whole flow passage, and mainly happened at the head and tail areas of the vanes. However, more than half the energy dissipation occurred in the runner, mostly at the leading edge of runner blade and the trailing edge of run-ner blade. Meanwhile, close to 20% of the energy dissipation occurred in the elbow. And it can be concluded that the method of entropy production analysis has the advantages of determining the quantity of energy dissipation and where the dissipation happens. The understanding of hydraulic behavior in the hydro turbine requires the detailed study of fluid flow in the turbine. Previous methods of analyzing the numerical simulation results on the fluid machinery are short of intuitiveness on energy dissipation.In this paper, the energy dissipation was analyzed based on the entropy production theory. 3-D steady flow simulations and entropy production calculations of the reduced hydro turbine were carried out. The results indicated that the entropy production theory was suitable for evaluating the performance of the hydro turbine. The energy dissipation in the guide vanes area weighted nearly 25% of the whole flow passage, and mainly happened at the head and tail areas of the vanes. However, more than half the energy dissipation occurred in the runner, mostly at the leading edge of runner blade and the trailing edge of run-ner blade. Meanwhile, close to 20% of the energy dissipation occurred in the elbow. And it can be concluded that the method of entropy production analysis has the advantages of determining the quantity of energy dissipation and where the dissipation happens.
出处 《Science China(Technological Sciences)》 SCIE EI CAS 2013年第7期1636-1643,共8页 中国科学(技术科学英文版)
基金 supported by the National Key Technology R&D Program of China(Grant No.2007BAA05B07) the National Natural Science Foundation of China(Grant No.51006026) the Fundamental Research Funds for the Central Universities(Grant No.HIT.NSRIF.2012.072)
关键词 FLUID MACHINERY HYDRO TURBINE ENTROPY production energy DISSIPATION fluid machinery hydro turbine entropy production energy dissipation
  • 相关文献

参考文献11

  • 1QIAN Zhong-dong YANG Jian-dong HUAI Wen-xin.NUMERICAL SIMULATION AND ANALYSIS OF PRESSURE PULSATION IN FRANCIS HYDRAULIC TURBINE WITH AIR ADMISSION[J].Journal of Hydrodynamics,2007,19(4):467-472. 被引量:24
  • 2JH Ferziger,M Peric.Computational Methods for Fluid Dynamics[]..2002
  • 3Perkins DH.Introduction to High Energy Physics[]..2000
  • 4Bejan A.Entropy generation minimization: The new thermodynamics of finite-size devices and finite time processes[].Journal of Applied Physics.1996
  • 5Liu Shuhong,Li Shengcai,Wu Yulin.Pressure fluctuation prediction of a model Kaplan turbine by unsteady turbulent flowsimulation[].Journal of Fluid Mechanics.2009
  • 6Kaluri Ram Satish,Basak Tanmay.Entropy generation due to natural convection in discretely heated porous square cavities[].Energy.2011
  • 7H Herwig,D Gloss,T Wenterodt.A new approach to understanding and modelling the influence of wall roughness on friction factors for pipe and channel flows[].Journal of Fluid Mechanics.2008
  • 8Naterer G F,Camberos J A.Entropy-based design and analysis of fluids engineering systems[].Journal of Women s Health.2008
  • 9KOCK F,HERWIG H.Local entropy production inturbulent shear flows:a high-Reynolds number modelwith wall functions[].Waerme und Stoffuebertragung.2004
  • 10Zhang H C,Schmandt B,Herwig H.Determination of loss coeffi-cients for micro-flow devices:A method based on the second law analysis(SLA)[].Proceedings of the ASME Micro/Nano Scale Heat and Mass Transfer International Conference.2009

二级参考文献7

共引文献23

同被引文献102

引证文献16

二级引证文献64

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部