期刊文献+

平纹织物-单向带混杂层合板挖补修理后的拉伸性能 被引量:1

Tensile behavior of fabric-unidirectional tape hybrid laminates after scarf repair
原文传递
导出
摘要 对含穿透损伤的平纹织物-单向带混杂铺层层合板挖补修理后的拉伸性能进行了试验研究,结果表明试件的拉伸强度随挖补斜度的增大而提高,当挖补斜度达到1:30时,修理试件的强度可以达到完好板的103.2%。此外挖补斜度不同的试件表现出不同的破坏模式.在试验基础上建立有限元模型研究修理试件的拉伸性能,计算得到的极限强度和破坏模式与试验结果吻合良好.通过有限元模型进一步分析了挖补斜度对胶膜应力分布、试件拉伸强度及破坏模式的影响.研究结论可以为含穿透损伤混杂铺层层板的挖补修理设计提供理论指导。 Experimental study on tensile behavior of fabric-unidirectional tape hybrid laminate repaired by scarf method was conducted in the paper.The results show tensile strength increasing with scarf ratio,and the specimen with scarf ratio of 1:30has the highest tensile strength which could reach 103.2% of the intact laminate strength. Besides,failure mode of specimen changes upon the scarf ratio.Based on test results,a finite element model was adopted to research tensile behavior of repaired specimen.The calculated strength and failure mode are in good agreement with test results.Thorough study was carried out with the finite element model to investigate the influence of scarf ratio on stress distribution in adhesive,tensile strength and failure mode of the specimen. Conclusions of the investigation provide insight into scarf repair design method on hybrid plain woven fabric laminate with penetrate damage.
出处 《复合材料学报》 EI CAS CSCD 北大核心 2013年第S1期182-188,共7页 Acta Materiae Compositae Sinica
关键词 挖补修理 混杂层合板 拉伸强度 破坏模式 有限元模型 scarf repair hybrid laminate tensile strength failure mode finite element model
  • 相关文献

参考文献19

二级参考文献49

  • 1张文毅,姚振汉,姚学锋,曹艳平.编织复合材料的一种数值模型[J].工程力学,2004,21(3):55-60. 被引量:6
  • 2孙侠生,胡红东.国外民用飞机结构强度技术的发展思路研究[J].航空科学技术,2004(6):23-26. 被引量:10
  • 3胡红东,孙树栋.欧美加强民用航空复合材料技术开发[J].国际航空,2007(5):63-65. 被引量:3
  • 4许延敏,程小全,陈浩,胡仁伟.含孔平面编织混杂铺层层合板压缩性能[J].航空材料学报,2007,27(3):87-90. 被引量:5
  • 5崔元庆.复合材料损伤结构胶接补强修理分析及设计技术[M].西安:西北工业大学,1999..
  • 6白金泽.复合材料胶接修理参数优化分析[M].西安:西北工业大学,2000..
  • 7Wang C H, Gunnion A. Design methodology for scarf repairs to composite structures[R]. DSTO- RR- 0317, 2006.
  • 8Kumar S B, Sridhar I, Sivashanker S, et al. Tensile failure of adhesively bonded CFRP composite scarf joints[J].Materials Science and Engineering: B, Solid State Materi als for Advanced Technology, 2006, 132(1/2): 113- 120.
  • 9Chou S P. Finite element application for strength analysis of scarf-patch-repaired composite laminate [D]. Taiwan: Department of Aerospace Engineering, Chung Yuan Christia University, 1998.
  • 10Campilho R D S G, Demoura M F S F, Domingues J J M S. Stress and failure analyses of scarf repaired CFRP lami nares using a cohesive damage model[J]. Journal Adhe sion Science Technology, 2007, 21(9): 855 -870.

共引文献304

同被引文献11

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部