期刊文献+

SiO_2-MWNTs/聚乳酸复合材料的冷结晶动力学及球晶形态 被引量:6

Cold crystallization kinetics and spherulitic morphologies of SiO_2-MWNTs/polylactide composites
原文传递
导出
摘要 为研究多壁碳纳米管(MWNTs)对聚乳酸(PLA)冷结晶动力学和球晶形态的影响,分别以PLA和表面包覆纳米SiO2并接枝硅烷偶联剂的纳米SiO2改性MWNTs(SiO2-MWNTs)为基体和改性剂,经溶液共混法制备了SiO2-MWNTs/PLA复合材料。采用DSC、偏光显微镜、Jeziorny模型和Johnson-Mehl-Avrami模型研究了复合材料的非等温冷结晶动力学和球晶形态。结果表明:SiO2-MWNTs可作为异相成核剂,能有效降低SiO2-MWNTs/PLA复合材料的冷结晶温度,提高晶核生成速率和晶体生长活化能。SiO2-MWNTs/PLA复合材料的冷结晶过程主要由成核作用控制,加入SiO2-MWNTs可同时提高复合材料的结晶速率和结晶度。冷结晶时,PLA球晶尺寸小于熔体冷却结晶时的,且SiO2-MWNTs含量对冷结晶球晶尺寸的影响远小于其对熔体冷却结晶球晶尺寸的。所得结论对优化PLA的结晶结构和性能、制备高性能PLA复合材料具有指导意义。 In order to investigate the effects of multi-walled carbon nanotubes(MWNTs)on the cold crystallization kinetics and spherulitic morphologies of polylactide(PLA),PLA and nano-SiO2 modified MWNTs(SiO2-MWNTs)which was surface-coated with nano-SiO2 and grafted with silane couple agent were selected as matrix and modifying agent respectively to prepare SiO2-MWNTs/PLA composites via solution blended process.DSC,polarized optical microscope,Jeziorny model and Johnson-Mehl-Avrami model were used to investigate the non-isothermal cold crystallization kinetics and spherulitic morphologies of composites.The results indicate that SiO2-MWNTs can act as heterogeneous nucleating agent which decreases the cold crystallization temperature,increases the nucleation rate and the activation energy of crystal growth of SiO2-MWNTs/PLA composites effectively.Cold crystallization process of SiO2-MWNTs/PLA composites is mainly dominated by nucleation,and the addition of SiO2-MWNTs can improve crystallization rate and crystallinity of the composites simultaneously.The spherulitic size of PLA which is cold crystallized is smaller than that of melt cooling crystallized.The influence of SiO2-MWNTs content on cold crystallization spherulitic size is much smaller than that of it on melt cooling crystallization spherulitic size.The conclusions have guiding significance for optimizing the crystal structure and properties of PLA and preparing high-performance PLA composites.
出处 《复合材料学报》 EI CAS CSCD 北大核心 2015年第3期737-743,共7页 Acta Materiae Compositae Sinica
基金 国家自然科学基金(20976131)
关键词 聚乳酸 碳纳米管 纳米SIO2 包覆 冷结晶 结晶动力学 球晶形态 polylactide carbon nanotubes nano-SiO2 coated cold crystallization crystallization kinetics spherulitic morphologies
  • 相关文献

参考文献12

  • 1王劭妤,石坚,郑来云.碳纳米管/PLA复合材料制备及性能[J].复合材料学报,2012,29(6):50-54. 被引量:16
  • 2田蓉,王贤保,陈蓉,郑晗,胡华亭,刘芳鸣.可降解碳纳米管/聚乳酸复合材料的制备及性能[J].复合材料学报,2011,28(1):26-30. 被引量:11
  • 3徐涛,杨静晖,刘际伟,傅强.碳纳米管的表面修饰及其对碳纳米管/氟橡胶复合材料导电性能的影响[J].复合材料学报,2010,27(3):16-21. 被引量:6
  • 4张雪勤,杨琥,王治流,程镕时.高聚物环带球晶的研究进展[J].高分子通报,2006(2):1-8. 被引量:12
  • 5Mukesh Kumar,S. Mohanty,S.K. Nayak,M. Rahail Parvaiz.Effect of glycidyl methacrylate (GMA) on the thermal, mechanical and morphological property of biodegradable PLA/PBAT blend and its nanocomposites[J]. Bioresource Technology . 2010 (21)
  • 6K. Chrissafis.Detail kinetic analysis of the thermal decomposition of PLA with oxidized multi-walled carbon nanotubes[J]. Thermochimica Acta . 2010 (1)
  • 7R. Pantani,F. De Santis,A. Sorrentino,F. De Maio,G. Titomanlio.Crystallization kinetics of virgin and processed poly(lactic acid)[J]. Polymer Degradation and Stability . 2010 (7)
  • 8Hongbo Li,Michel A. Huneault.Effect of nucleation and plasticization on the crystallization of poly(lactic acid)[J]. Polymer . 2007 (23)
  • 9Inpil Kang,Yun Yeo Heung,Jay H. Kim,Jong Won Lee,Ramanand Gollapudi,Srinivas Subramaniam,Suhasini Narasimhadevara,Douglas Hurd,Goutham R. Kirikera,Vesselin Shanov,Mark J. Schulz,Donglu Shi,Jim Boerio,Shankar Mall,Marina Ruggles-Wren.Introduction to carbon nanotube and nanofiber smart materials[J]. Composites Part B . 2006 (6)
  • 10Chungui Zhao,Guanjun Hu,Ryan Justice,Dale W. Schaefer,Shimin Zhang,Mingshu Yang,Charles C. Han.Synthesis and characterization of multi-walled carbon nanotubes reinforced polyamide 6 via in situ polymerization[J]. Polymer . 2005 (14)

二级参考文献70

  • 1丁建东,朱军祥,杨玉良.聚环氧乙烷球晶的带状结构与球晶内部的环形裂纹[J].高等学校化学学报,1996,17(3):498-499. 被引量:8
  • 2Zhang Qinghua, Rastogi Sanjay, Chen Dajun, et al. Low percolation threshold in single- walled carbon nanotube/high density polyethylene composites prepared by melt processing technique [J]. Carbon, 2006, 44: 778-785.
  • 3Chen Wei, Tao Xiaoming. Production and characterization of polymer nanoeomposite with aligned single wall carbon nanotubes [J]. Applied Surface Science, 2006, 252: 3547- 3552.
  • 4Ryana K P, Cadek M, Nicolosi V, Walker S, Ruether M. Muhiwalled carbon nanotube nucleated crystallization and reinforcement in poly(vinyl alcohol) composites [J]. Synthetic Metals, 2006, 156: 332-335.
  • 5Choi J H, Park J H, Moon J S, Nam J W, Yoo J B, Park C Y, Park J H. Fabrication of carbon nanotube emitter on the flexible substrate[J]. Diamond & Related Materials, 2006, 15: 44-48.
  • 6Ebrahim Najafi, Kwanwoo Shin. Radiation resistant polymer carbon nanotube nanoeomposite thin films [J]. Colloids and Surfaces A: Physicochem Eng Aspects, 2005, 257: 333-337.
  • 7Chen Wei, Tao Xiaoming, Xue Pu, Cheng Xiaoyin. Enhanced mechanical properties and morphological characterizations of poly(vinyl alcohol) carbon nanotube composite films [J]. Applied Surface Science, 2005, 252: 1404-1409.
  • 8Lee Deuk- Yong, Lee Myung- Hyun, Kim Kwang J, Seok Heo, Kim Bae-Yeon, Lee Se Jong. Effect of muhiwalled carbon nanotube (M-CNT) loading on M-CNT distribution behavior and the related electromechanical properties of the M CNT dispersed ionomeric nanocomposites [J]. Surface & Coatings Technology, 2005, 200.. 1920-1925.
  • 9Yael Dror, Wael Salalha, Wim Pyckhout- Hintzen, Yarin Alexander L. From carbon nanotube dispersion to composite nanofibers [J]. Progr Colloid Polym Sci, 2005, 130: 64-69.
  • 10Joachim Loos, Alexander Alexeeva, Nadia Grossiordc. Visualization of single-wall carbon nanotube (SWNT) networks in conductive polystyrene nanocomposites by charge contrast imaging[J].Ultramicroscopy, 2005, 104: 160-167.

共引文献41

同被引文献78

引证文献6

二级引证文献41

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部