期刊文献+

自振空化射流提高钻井速度的可行性研究 被引量:21

Feasibility Study of Self-Resonating Cavitating Jet for Augmenting Drilling Rate
下载PDF
导出
摘要 空化射流用于石油钻井的可行性研究结果表明,在深井钻井中,利用空泡破裂产生强大破坏作用和振动冲击波来提高清洗、切割和钻探的效率,其效果将是显著的,也是可行的。在比普通喷嘴射流或普通空化喷嘴射流更深的井底和更高的围压条件下,自振空化射流有较大的起始空化数和较强的空化能力,有较好的切割岩石和清洗岩屑净化井底的作用。同时,根据自振空化射流原理,研制了风琴管自振空化喷嘴,现场试验结果证实了自振空化喷嘴钻头在保护钻头、减少钻头磨损及增加进尺、提高机械钻速方面有显著作用。 It is obviously effective and applicable to make use of intense destruction effect and vibration noise of cavitaion effect to improve the efficiency of well bottom cleaning, cutting and drilling in deep wells. The feasibility on applications of cavitation water jet in deep well drilling proves that the self-irritating cavitaion water jet has bigger cavitation inception, stronger cavitation capacity, better rock cutting and well bottom cleaning in high ambient pressure deep well environments than conical nozzle water jet. Therefore, a specific jet nozzle, self-irritating cavitation jet nozzle of organ pipe, was designed based on self-irritating cavitation jet theory. Experiments in working site validate that the self-irritating cavitation nozzles act well in protecting drilling bits, reducing bits wear, increasing drilling footages and drilling speed.
出处 《石油钻探技术》 CAS 2004年第3期1-4,共4页 Petroleum Drilling Techniques
基金 国家杰出青年科学基金(50125413)CNPC钻井工程重点实验室应用基础研究项目(03A20201)
关键词 钻井速度 自振空化射流技术 钻井工艺 空蚀现象 深井钻井工艺 钻头 cavitation fluidics nozzle drilling speed field testing feasibility research
  • 相关文献

参考文献8

  • 1李根生,沈忠厚.空化射流及其在钻井工程中的应用研究[J].石油钻探技术,1996,24(4):51-54. 被引量:23
  • 2Maurer W C. Advanced Drilling Techniques [M]. Tulsa: The Petroleum Publishing Company, 1980: 30.
  • 3Johnson V E Jr, Conn A F, et al . Cavitating and Structured Jets for Mechanical Bits to Increase Drilling Rate [J] . Trans ASME Journal of Energy Resources Technology, 1984, 106 (6): 282-294.
  • 4Conn A F, Radtke R P. Cavitating Bit Jets Promise Faster Drilling for Deep-Hole Operations [J]. Oil & Gas Journal,Oct. 31, 1977:129 146.
  • 5Johnson V E Jr, Conn A F, et al. Self-resonating Cavitating Jets [R]. England: Proceedings of 6th International Symposium on Jet Cutting Technology, 1982: 1 26.
  • 6Johnson V E Jr, Chahine G L, Lindenmuth W T, et al. The Development of Structured Cavitating Jets For Deep-Hole Bits[R]. SPE 11060, 1982: 1-8.
  • 7李根生,沈忠厚,张召平,廖华林.自振空化射流钻头喷嘴研制及现场试验[J].石油钻探技术,2003,31(5):11-13. 被引量:42
  • 8沈忠厚,李根生,周长山.牙轮钻头自激振荡脉冲喷嘴的实验研究[J].石油大学学报(自然科学版),1991,15(3):36-43. 被引量:8

二级参考文献4

共引文献66

同被引文献216

引证文献21

二级引证文献226

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部