期刊文献+

基于模糊评价的施工机械决策模型及应用 被引量:2

Construction Machinery Decision Model Based on Fuzzy Evaluation and Its Application
下载PDF
导出
摘要 施工机械的评价选型是企业经营中的一项重要工作 ,影响因素多且存在难以量化的模糊因素 ,其实质是一个多目标综合评价问题。本文依据模糊综合评价的基本原理 ,通过对影响施工机械选型的技术和经济指标分析并进行归一化处理 ,科学合理地确定权重 ,建立了模糊评价选优决策模型。运用一个施工企业选择摊铺机的实例说明 ,该模型对正确选择施工机械 ,使有限的投资发挥最大的技术经济效益具有积极的指导作用和较高的实用价值。 The evaluation and optimal selection of construction machinery is an important work in construction enterprise, but it has many fuzzy factors and difficult to measure, and it is a multi objective synthetic evaluation problem also. In this paper, according to the principle of fuzzy synthetic evaluation method, first, the technical and economic indexes which influence the optimum selection of machinery are analyzed. Then, the weight of every index is identified by synthetic weight method. After that, a decision model based on fuzzy evaluation is built up. Finally, a practical example of paver selection is given. The result shows that the model can be used in the selection of construction machinery.
出处 《机械科学与技术》 CSCD 北大核心 2004年第7期834-836,共3页 Mechanical Science and Technology for Aerospace Engineering
关键词 施工机械 模糊评价 决策模型 Construction machinery Fuzzy evaluation Decision model
  • 相关文献

参考文献2

二级参考文献4

  • 1陶菊春.风险性投资决策的一种分析方法[J].数量经济技术经济研究,1993,10(11):52-55. 被引量:7
  • 2胡毓达.多目标计划有效性理论[M].上海:上海科学技术出版社,1994.63-90.
  • 3何月娥,农机试验设计,1986年
  • 4北京大学数学系试验设计组,正交试验法,1979年

共引文献221

同被引文献13

  • 1周穗华.概率型数据模糊化方法研究[J].模糊系统与数学,2004,18(4):59-63. 被引量:2
  • 2王婧超,李立州,岳珠峰.涡轮叶片MDO实现的进展[J].科学技术与工程,2005,5(7):457-459. 被引量:4
  • 3Engineous Software,Inc.iSIGHT reference guide. . 2003
  • 4TSAI H C,HSIAO S W.Evaluation of alternatives for product customization using fuzzy logic. Journal of Information Science . 2004
  • 5Duanning Zhou.A fuzzy set approach to the evaluation of journal grades. Fuzzy Sets and Systems . 2002
  • 6S.H. Kim,T.J. Ko,J.H. Ahn.Elimination of Settling Error Due to Clamping Forces in On-Machine Measurement[J]. International Journal of Advanced Manufacturing Technology . 2002 (8)
  • 7M.-W. Cho,T.-I. Seo.Inspection Planning Strategy for the On-Machine Measurement Process Based on CAD/CAM/CAI Integration[J]. International Journal of Advanced Manufacturing Technology . 2002 (8)
  • 8Kim K D,Chung S C.On-machine Inspection System Accuracy Improvement Using an Artifact. Journal of Manufacturing Systems . 2003
  • 9高峰,李艳,田沙,黄玉美,郝来成,王俊岭.数控成形砂轮磨齿机的在机测量方法研究[J].仪器仪表学报,2008,29(3):540-544. 被引量:19
  • 10刘丽冰,刘又午,赵小松,章青,方沂.加工中心在线检测误差补偿技术研究[J].中国机械工程,2000,11(3):313-316. 被引量:25

引证文献2

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部