期刊文献+

金刚石砂轮的激光修整技术 被引量:4

Study on Laser Truing and Dressing of Diamond Grinding Wheels
下载PDF
导出
摘要 利用 CO2 连续激光器进行了激光修锐树脂结合剂和黄铜结合剂金刚石砂轮的试验 ,在VH- 80 0三维数字显微镜观察激光作用前后金刚石砂轮表面的微观形貌 ,对激光作用下砂轮表面不同结合剂材料的去除机理进行了分析 .考察了砂轮修锐前后表面峰点高度分布的变化 ,比较了不同激光参数作用下不同的修锐效果 .实验证明了激光技术应用于金刚石砂轮的修锐是可行的 ,激光对不同结合剂砂轮进行修锐时存在一个合适的修锐参数范围 ,在这个范围内 。 Experiments on dressing resin and copper bonded diamond grind wheels by means of continuous wave C02 laser are carried out. The diamond wheel topographies before and after laser scanning are observed by VH-800 series three-dimension digital microscope. The mechanism of removing bond materials is analyzed. The wheel profiles before and after dressing are observed. The results of laser dressing under different process parameters are compared. The experimental results show that it is feasible that application of laser technologies to dress diamond wheel. By properly selecting laser heating parameters and dressing conditions, high-quality dressing can be achieved.
出处 《上海交通大学学报》 EI CAS CSCD 北大核心 2004年第7期1069-1072,共4页 Journal of Shanghai Jiaotong University
基金 上海市重点科技项目资助 ( 0 2 111112 5 )
关键词 激光修整 金刚石砂轮 树脂结合剂 黄铜结合剂 Bond strength (materials) Diamond cutting tools Laser applications Wheel dressing
  • 相关文献

参考文献2

二级参考文献6

共引文献11

同被引文献38

  • 1金卫东,任成祖,华瑾海,王太勇.Electro-Discharge Fine Truing of Metal-Bonded Fine-Grain Diamond Wheel Based on Real-Time Monitoring[J].Transactions of Tianjin University,2005,11(3):176-182. 被引量:2
  • 2王续跃,吴勇波,王军,徐文骥.激光入射角对修整圆柱形CBN砂轮影响[J].大连理工大学学报,2005,45(5):672-675. 被引量:4
  • 3王续跃,Y.Wu,徐文骥,王连吉,J.Wang.激光修整圆柱形CBN砂轮中偏焦量对能量分布的影响[J].中国机械工程,2006,17(7):702-705. 被引量:3
  • 4Ohmori H,Li W,Makinouchi A,et al.Efficient and precision grinding of small hard and brittle cylindrical parts by the centerless grinding process combined with electro-discharge truing and electrolytic in-process dressing[J].Journal of Materials Processing Technology,2000,98 (3):322-324.
  • 5Bandyopadhyay B P,Ohmori H,Takahashi I.Efficient and stable grinding of ceramics by electrolytic in-process dressing (ELID)[J].Journal of Materials Processing Technology,1997,66 (1/2/3):18-24.
  • 6Lim H S,Fathima K,Senthil K A,et al.A fundamental study on the mechanism of electrolytic in-process dressing (ELID) grinding[J].International Journal of Machine Tools and Manufacture,2002,42 (8):935-936.
  • 7Ohmori H,Takahashi I,Bandyopadhyay B P.Ultra-precision grinding of structural ceramics by electrolytic in-process dressing (ELID) grinding[J].Journal of Materials Processing Technology,1996,57 (3/4):272-277.
  • 8Zhang Chunhe,Ohmori Hitoshi,Li Wei.Precision shaping of small diameter wheels using micro electric-discharge truing (MEDT) and hole-machining of Al2O3 material[J].International Journal of Machine Tools and Manufacture,2000,40(5):661-674.
  • 9Han Huang.Effects of truing/dressing intensity on truing/dressing efficiency and grinding performance of vitrified diamond wheels[J].Journal of Materials Processing Technology,2001,117 (1/2):9-14.
  • 10Wang Xiankui,Ying Baoge,Liu Weigang.EDM dressing of fine grain super abrasive grinding wheel[J].Journal of Materials Processing Technology,1996,2 (4):299 -302.

引证文献4

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部