摘要
The tungsten-inert-gas (TIG) arc welding experiments of cemented carbide YG30 and steel 45 were carried out using the Ni-Fe-C filling alloys. The eta phases and mechanical properties of welded joints were analyzed by means of scanning electronic microscope (SEM), transmission electronic microscope (TEM) coupled with selected diffraction, electronic probe microanalysis and bending strength methods. The experimental results show that the chemical composition of the filling alloys affects eta phase formation. When the carbon and nickel contents in filling alloys are 0.61 wt% and 55.29 wt%, respectively, no eta phases form. And the joint bending strength is the highest to 1.352 GPa. But if they are 0.01wt% and 55.38wt%, the eta phases are formed at the boundaries of the cemented carbide and the weld, and the thickness of eta phase layer is about 110 micrometers. And the joint bending strength is low. Usually, these eta phases are anomalously granular, and easy to accumulate at the boundaries between cemented carbides and the weld. They are multiple M_6C rich in tungsten and iron.
The tungsten-inert-gas (TIG) arc welding experiments of cemented carbide YG30 and steel 45 were carried out using the Ni-Fe-C filling alloys. The eta phases and mechanical properties of welded joints were analyzed by means of scanning electronic microscope (SEM), transmission electronic microscope (TEM) coupled with selected diffraction, electronic probe microanalysis and bending strength methods. The experimental results show that the chemical composition of the filling alloys affects eta phase formation. When the carbon and nickel contents in filling alloys are 0.61 wt% and 55.29 wt%, respectively, no eta phases form. And the joint bending strength is the highest to 1.352 GPa. But if they are 0.01wt% and 55.38wt%, the eta phases are formed at the boundaries of the cemented carbide and the weld, and the thickness of eta phase layer is about 110 micrometers. And the joint bending strength is low. Usually, these eta phases are anomalously granular, and easy to accumulate at the boundaries between cemented carbides and the weld. They are multiple M_6C rich in tungsten and iron.
基金
financial supports from plan program of Dalian(grants No.2001145)
