期刊文献+

MPEG-2视频解码器中的错误隐藏技术 被引量:3

Error concealment techniques in MPEG-2 video decoders
原文传递
导出
摘要 视频信号无论从空域还是时域都有很强的相关性,因此传输视频信号除了加纠错码外,在接收端的错误隐藏技术对提高重构图像质量也是十分有效的。该文提出了一个支持错误隐藏技术的MPEG-2(movingpictureexpertgroup)视频解码器的设计方案,用该方案进行的仿真实验证明其是可行的。同时基于图像信号的相关性、光滑性及一致性的假设,分别对MPEG-2的I-帧、P-帧和B-帧图像提出了相应的错误隐藏技术。此外通过分析直流系数的错误结果后,提出了直流系数的错误隐藏方法。该文算法简单,适于实时处理,峰值信噪比PSNR比一般传统方法平均高出2~3dB。 Video signals have high intra-frame and inter-frame correlations, so error concealment techniques in the decoder can be more effective other than error correction codes in video signal transmissions. Simulation of a video decoder design with error concealment have shown that the error concealment scheme is quite effective. Statistical correlations of the smoothness and consistency in images were used to develop error concealment techniques for I-frame, P-frame, and B-frame MPEG-2. Error concealment techniques for direct current (DC) coefficient errors gave higher quality reconstructed images. Test results show that the peak signal-to-noise ratio is 2~3 dB higher than that of some traditional methods and can be used with real-time processing.
出处 《清华大学学报(自然科学版)》 EI CAS CSCD 北大核心 2004年第7期921-924,共4页 Journal of Tsinghua University(Science and Technology)
基金 天津市自然科学基金资助项目(023600111)
关键词 图像信号处理 错误隐藏 直流系数 视频解码器 image signal processing error concealment direct current (DC) coefficient video decoder
  • 相关文献

参考文献7

  • 1Jian F, Kwok T L, Hassan M. Error concealment for MPEG Video transmissions [J]. IEEE Trans on Consumer Electronics, 1997, 43(2): 183-187.
  • 2Cote G, Shirani S, Kossentini F. Optimal model selection and synchronization for robust video communications over error-prone network [J]. IEEE J Selected Areas in Commun, 2000, 18(6): 952-964.
  • 3Aign S, Fazel K. Temporal and spatial error concealment techniques for hierarchical MPEG-2 video codec [A]. IEEE International Conference on Commun [C]. Washington: IEEE Service Center, 1995. 1778-1783.
  • 4Suh J W, Ho Y S. Error concealment based on directional interpolation [J]. IEEE Trans on Consumer Electronics, 1997, 43(3): 295-302.
  • 5Kim E T, Choi S J, Kim H M. Weighted boundary matching algorithm for error concealment in the MPEG-2 video bit stream [J]. Signal Processing, 1999, 73(3): 291-295.
  • 6Sofia T, Ioannis P. MPEG-2 error concealment based on block-matching principles [J]. IEEE Trans on Circuit and System for Video Tech, 2000, 10(4): 1-11.
  • 7Park J W, Kim J W. Lee S U. DCT coefficients recovery-based error concealment technique and its application to the MPEG-2 bit stream error [J]. IEEE Trans on Circuit and System for Video Technology, 1997, 7(6): 845-854.

同被引文献15

  • 1朱飞跃,王颖.一种移动视频通信中的错误隐藏方法研究[J].微电子学与计算机,2004,21(6):6-9. 被引量:5
  • 2曹继华,李凤亭,林星刚.关于MPEG-2空域时域自适应错误隐藏算法[J].信号处理,2004,20(3):297-303. 被引量:6
  • 3马宇峰,蔡安妮.基于最小像素跨度准则的空域错误隐藏方法[J].通信学报,2005,26(1):1-5. 被引量:7
  • 4Xu Y,Zhou Y.H.264 video communication based refined error concealment schemes[J].IEEE Transactions on Consumer Electronics,2004,50(4):1135-1141.
  • 5Peng Qiang,Yang Tianwu,Zhu Changqian.Block-based temporal error concealment for video packet using motion vector extraction[C]//Proceeding of ICCCAS'02.Piscataway,NJ,USA:IEEE Press,2002:10-14.
  • 6Shahram S,Faouzi K,Rabab W.Concealment method for video communications in an error-prone environment[J].IEEE Journal on Selected Areas in Communications,2000,18(6):1122-1128.
  • 7Lam W M,Reibman A R,Liu B.Recovery of lost or erroneously received motion vectors[C]//Proceedings of ICASSP.Piscataway,NJ,USA:IEEE Press,1993,5:417-420.
  • 8Al-Mualla M,Canagarajah N,Bull D R.Temporal error concealment using motion field interpolation[J].Electronics Letters,1999,35(3):215-217.
  • 9Chen Y,Hu Y,Oscar C A,et al.Video error concealment using spatio-temporal boundary matching and partial differential equation[J].IEEE Transactions on Multimedia,2008,10(1):2-15.
  • 10Zheng J H,Chau L P.Error concealment algorithm for H.26L using first-order plane estimation[J].IEEE Transactions on Multimedia,2004,6(6):801-805.

引证文献3

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部