期刊文献+

正交各向异性功能梯度圆柱壳的自由振动 被引量:7

Free Vibration of Orthotropic Functionally Graded Cylindrical Shells
下载PDF
导出
摘要 利用从弹性力学的三维基本方程导得的状态方程 ,结合层合近似模型 ,求得了柱型正交各向异性功能梯度圆柱壳的自由振动频率 ,给出了数值算例 ,并与前人结果作了比较 。 A laminate approximated model and a state equation derived from the three-dimensional equations of elasticity are employed to solve the free vibration of a cylindrically orthotropic functionally graded cylindrical shell. Some numerical examples are presented and compared with those results provided by others. The influence of some related parameters on frequencies is finally discussed.
机构地区 浙江大学
出处 《应用力学学报》 CAS CSCD 北大核心 2004年第3期75-78,共4页 Chinese Journal of Applied Mechanics
基金 国家自然科学基金资助项目 (No .10 0 0 2 0 16)
关键词 功能梯度材料 圆柱壳 自由振动 functionally graded material, cylindrical shell, free vibration.
  • 相关文献

参考文献10

  • 1[1]Yamanouchi M, Koizumi M, Hirai T, Shiota I, Proceeding of the first international symposium on functionally gradient materials [A], Japan, 1990
  • 2[2]Kim JH, Paulino GH, Finite element evaluation of mixed mode stress intensity factors in functionally graded materials [J], International Journal for Numerical Methods in Engineering, 2002, 53: 1903~1935
  • 3[3]Woo J, Meguid SA, Nonlinear analysis of functionaly graded plates and shallow shells [J], International Journal of Solids and Structures, 2001, 38: 7409~7421
  • 4[4]Chen W Q, Stress distribution in a rotating elastic functionally graded material hollow sphere with spherical isotropy[J], Journal of Strain Analysis for Engineering Design, 2000, 35: 13~20
  • 5[5]Yang j, Shen HS, Dynamic response of initially stressed functionally graded rectangular thin plates [J], Composite Structures, 2001, 54: 497~508
  • 6王保林,杜善义,韩杰才.功能梯度材料的热/机械耦合分析研究进展[J].力学进展,1999,29(4):528-548. 被引量:26
  • 7[7]Loy CT, Lam K Y, Reddy JN, Vibration of functionally graded cylindrical shells [J], International Journal of Mechanical Sciences, 1999,41: 309~324
  • 8[9]Tarn JQ, Exact solutions for functionally graded anisotropic cylinders subjected to thermal and mechanical loads [J], International Journal of Solids and Structures, 2001, 38: 8189~8206
  • 9[10]Fan JR, Zhang JY, Analytical solution for thick, doubly curved, laminated shells [J], Journal of Engineering Mechanics, 1992, 118: 1338~1356
  • 10[11]Tanigawa Y, Some basic thermoelastic problems for nonhomogeneous structural materials [J], Applied Mechanics Reviews, 1995, 48: 287~300

二级参考文献34

  • 1童隆长.用混合的欧拉-拉格朗日有限元法模拟体积塑性成形过程[J].塑性工程学报,1996,3(2):19-23. 被引量:2
  • 2王忠金.模锻过程的三维模拟及连杆终锻成形规律的研究:博士论文[M].吉林工业大学,1995..
  • 3陈军.虚拟模具制造及金属成形过程三维仿真技术研究:博士论文[M].上海交通大学,1996..
  • 4王广春.三维摆碾过程的刚塑性有限元模拟:博士论文[M].哈尔滨工业大学,1995..
  • 5单德彬.机匣挤压的三维数值数据:博士论文[M].哈尔滨工业大学,1996..
  • 6左旭 卫原平 等.十字轴多工位锻造三维CAE仿真[J].上海交通大学学报,1999,20(3):31-34.
  • 7黄毅坚 李国基.金属成形过程刚塑性有限元分析中的摩擦问题[J].模具技术,1986,(2):10-14.
  • 8Wang Baolin,Acta Mech Solid Sin,1998年,11卷,1期,84页
  • 9Gu P,Int J Solids Struct,1997年,34卷,1期,1页
  • 10Gu P,Int J Solids Struct,1997年,34卷,24期,3085页

共引文献25

同被引文献49

引证文献7

二级引证文献35

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部