摘要
热轧带钢局部高点对冷轧带钢板厚和内应力分布具有重要影响。采用 B3样条函数拟合带材厚度横向分布 ,定量研究热轧来料局部高点对冷轧带钢板厚和内应力分布的影响。研究结果表明 :轧后带钢局部高点高度及附加张应力的大小与来料高点高度成正比 ,随总轧制压下率的增大而减小。
The hot strip local high points have very important influence on the internal stress distribution and thickness of cold strip. The B 3 spline function is used to fit the lateral distribution of strip thickness. The influence of hot strip local high points on cold strip internal stress distribution and thickness was quantitatively analyzed. Results indicate the local high point height and additional tension stress of rolled strip are proportional to local high point initial height of strip, decrease as rolling reduction ratio increases.
出处
《钢铁》
CAS
CSCD
北大核心
2004年第6期47-50,共4页
Iron and Steel
关键词
热轧带钢
冷轧带钢
局部高点
内应力分布
附加张应力
hot strip, cold strip, local high points, internal stress distribution, additional tension stress