摘要
The software that simulates the flow, temperature, concentration and the heat generation field in the Outkumpu flash smelting furnace, was developed by a numerical method of the particle-gas flow together with some chemical reaction models. Many typical operating conditions were chosen for simulation in order to obtain the effect of the distribution air, process air, central oxygen and the oil-burner position etc. The concepts about optimum operation, 3C(concentration of high temperature, high oxygen and laden concentrate particles), are concluded from these simulated results, which have been checked primarily by operational experiments.
The software that simulates the flow, temperature, concentration and the heat generation field in the Outkumpu flash smelting furnace, was developed by a numerical method of the particle-gas flow together with some chemical reaction models. Many typical operating conditions were chosen for simulation in order to obtain the effect of the distribution air, process air, central oxygen and the oil-burner position etc. The concepts about optimum operation, 3C(concentration of high temperature, high oxygen and laden concentrate particles), are concluded from these simulated results, which have been checked primarily by operational experiments.
出处
《中国有色金属学会会刊:英文版》
CSCD
2004年第3期631-636,共6页
Transactions of Nonferrous Metals Society of China
关键词
炼铜
闪速炉
闪速熔炼
数值模拟
终点控制
numerical simulation
flash smelting furnace
optimum operation
copper smelting