摘要
单板质量直接影响胶合板质量,而单板旋切工艺条件是决定单板质量的主要因素之一。本文在单板旋切工艺最优化方面进行了研究得出椴木两种单板厚度的最佳工艺条件。
Plywood qualities are directly affected by the veneer qualities. The condition of veneer rotatory-cutting process is an important factor to decide the veneer qualities. This article has made scientific researches on the optimum of process for veneer rotatory-cutting, and obtained the optimum technologies for two kinds of veneer thickness of linden.
出处
《南京林业大学学报（自然科学版）》
CAS
CSCD
1989年第1期64-72,共9页
Journal of Nanjing Forestry University：Natural Sciences Edition
关键词
旋切工艺
优化方法
制材
Rotatory-cutting process
Optimum methods
Linden
