摘要
研究了10MW高温气冷实验堆中1次和多次(5次)通过的两种换料方式。在燃料的充分利用和功率展平等方面,多次通过都优于1次通过。并对多次通过换料方式作了进一步的平衡态参数和失冷失压事故分析,表明多次通过能较好地满足规范的要求。
This paper studies two shuffling ways, once through then out and multiple through then out, in HTR-10 MW Test Module. Multiple through then out is better than once through with regard to rational use of the fuel and flattening the power. The behaviour of equilibrium core and loss of coolant accident is analyzed. The results indicate that characteristic features of the multiple through then out could be better fulfilling the demands of safety criterions.
出处
《核科学与工程》
CSCD
北大核心
1993年第2期119-125,6,共7页
Nuclear Science and Engineering
关键词
高温气冷型堆
换料方式
燃耗
HTR-10 MW Test Module
One through then out
Multiple through then out
Power density
Burnup