期刊文献+

级配碎石结构材料类型与压实方法 被引量:2

On the Vibrating Compaction Method of Graded Aggregate Material
下载PDF
导出
摘要 目前,级配碎石的室内试验均采用击实法成型,此成型法不符合振动对无粘结粒料振动压实有效的原则.在自行研制的振动成型设备上,对3种结构类型的级配碎石进行振动压实试验,考察了频率、离心力、振幅对压实效果的影响.结果表明:当频率、离心力保持不变时,存在最佳振幅;振幅对压实的影响存在阈值.总结出各类型级配碎石的最佳振动参数,并根据压实特性及工程实践给出了室内振动压实试验的统一参数. At present, the compacting method of graded aggregate material is modified compaction test, it does not accord with graded aggregate material compaction properties. Three types of graded aggregate are compacted with different parameters on surface vibrating compactor. The effect of frequency, centrifugation force and nominal amplitude on the compacting were observed. The best nominal amplitude and threshold value exist. The best vibrating compaction parameters of each type were summed up. The unified indoors vibrating compaction parameters were put forward.
出处 《北华大学学报(自然科学版)》 CAS 2004年第4期368-372,共5页 Journal of Beihua University(Natural Science)
关键词 级配碎石 成型方法 振动压实 最佳参数 Graded aggregate Molding method Vibrating compaction Optimum parameter
  • 相关文献

参考文献1

  • 1[4]Govert TH Sweere. Unbound Granular Bases for Roads[R]. Road and Railway Research Laboratory of the Faculty of Civil Engineering of Delft University of Technology,1999.

同被引文献11

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部