期刊文献+

快速测定腈纶废水中COD_(Cr)的实验研究 被引量:3

Experimental Study on Quick Measurement of Chemical Oxygen Demand in Acrylic Fiber Wastewater
下载PDF
导出
摘要 通常采用重铬酸钾加热回流的标准方法测定化学需氧量(CODCr),但该方法的消解时间长,操作繁琐,难以满足当前环境监测的要求,为此研究了用微波消解法测定腈纶废水中的化学需氧量。实验结果表明,微波消解法的最佳消解时间为15 min,硫酸-硫酸银的最佳用量为3.00 mL。用该方法与标准方法测得腈纶原水、生化处理后废水的COD值相对误差分别为0.04、0.19,具有较高的精密度。该方法用于腈纶废水COD的测定时操作简便,经济、省时、省力。 The microwave digestion method was studied to measure CODCr in acrylic fiber wastewater. The optimum conditions were determined by testing digestion time and amount of catalyst. This method has the advantages of rapid digestion, simple operation and high accuracy, compared with the standard method. The results of the microwave digestion method were identified with those of the standard method.
作者 路帅 于文海
出处 《油气田环境保护》 CAS 2004年第3期39-40,共2页 Environmental Protection of Oil & Gas Fields
基金 <腈纶废水处理技术研究>是中国天然气集团公司攻关课题。
关键词 腈纶废水 COD值 化学需氧量 生化处理 环境监测 硫酸银 微波消解法 最佳用量 快速测定 加热 acrylic fiber wastewater, chemical oxygen demand, microwave digestion method, digestion time, experimental study
  • 相关文献

参考文献4

二级参考文献3

共引文献17

同被引文献66

引证文献3

二级引证文献16

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部