期刊文献+

PWM变频调速电机轴承电磁损伤的机理研究 被引量:7

Investigation on Motor Bearing Electromagnetism Damage Induced by PWM Inverters
下载PDF
导出
摘要 介绍了电机轴承电磁损伤的几种形式,重点研究了脉宽调制(PWM)变频调速电机轴承电磁损伤的机理,给出了电机定子绕组中性点电压和轴电压的测量结果,建立了PWM变频调速系统的物理模型,并对轴电压和轴承电流进行了计算机仿真,仿真结果与测量结果相吻合。 This paper investigates the different forms of bearing electromagnetism damages. The bearing electromagnetism damage problem induced by Pulse-Width Modulation (PWM) inverter is discussed. The signals of stator to ground voltage and rotor to ground voltage are obtained via experiment. A model of PWM inverter-fed system is established. The simulation results agree with the experiments.
出处 《电力科学与工程》 2004年第3期5-8,共4页 Electric Power Science and Engineering
基金 国家自然科学基金资助项目(No 50205008)
关键词 脉宽调制 电动机 轴电压 轴承电流 Pulse-Width Modulation (PWM) motor rotor to ground voltage bearing current
  • 相关文献

参考文献7

  • 1MICHAEL J, COSTELLO.Shaft voltages and rotating mechinery[J]. IEEE Trans on Industrial Application, 1993,29(3):419-426.
  • 2ERDMAN J M,KERKMAN R J ,SCHLEGEL D W,et al.Effect of PWM inverters on AC motor bearing currents and shaft voltages[J]. IEEE Trans Ind Applicat,1996,32:250-259.
  • 3BUSSE D F, ERDMAN J M. The effects of PWM voltage source inverters on the mechanical performance of rolling bearings[J]. IEEE Trans on Industrial Application, 1997,33(2):567-576.
  • 4MICHAEL J, COSTELLO. Shaft voltages and rotating mechinery[J]. IEEE Trans on Industrial Application, 1993,29(3):419-426.
  • 5BUSSE D F,ERDMAN J M.An evaluation of the electrostatic shielded induction motor: A solution for rotor shaft voltage buildup and bearing current[J]. IEEE Trans on Industrial Application, 1997,33(6):1563-1570.
  • 6柴永金.对电动机轴电流的分析及防范[J].电力安全技术,2001,3(2):13-13. 被引量:4
  • 7郭泰宇.变频传动电动机轴电流的影响及防范措施[J].电气传动自动化,2001,23(1):8-9. 被引量:2

二级参考文献1

  • 1Doyle Busse,Jay Erdman.Bearing currents and their relationship to PWM drives[].IEEE Transactions on Power Electronics.1997

共引文献4

同被引文献52

  • 1姜艳姝,刘宇,徐殿国,赵洪.PWM变频器输出共模电压及其抑制技术的研究[J].中国电机工程学报,2005,25(9):47-53. 被引量:101
  • 2幸善成,吴正国.逆变器驱动电机系统环路型电机轴承电流的研究[J].海军工程大学学报,2006,18(2):64-68. 被引量:3
  • 3HARRIS T A,KOTZALAS M N.滚动轴承分析[M].罗继伟,马伟,译.北京:机械工业出版社,2009.
  • 4刘欣,孙力,孙亚秀.PWM驱动系统中感应电动机轴电压轴电流研究[J].微电机,2007,40(9):5-8. 被引量:10
  • 5Muetze A, Andreas Binder. Calculation of motor capacitances for prediction of the voltage across the bearings in machines of inverter-based drive systems [J]. IEEE Transactions on Industry Applications, 2007, 43(3): 665-672.
  • 6Muetze A, Tamminen J, Ahola J. Influence of motor operating parameters on discharge bearing current activity[C]. Energy Conversion Congress and Exposition (ECCE), 2010: 2739-2746.
  • 7Magdun O, Binder A. Calculation of roller and ball bearing capacitances and prediction of EDM currents [C]. 35th Annual Conference of IEEE on Industrial Electronics, 2009:1051-1056.
  • 8David Hyypio. Mitigation of bearing electro-erosion of inverter-fed motors through passive common-mode voltage suppression[J]. IEEE Transactions on Industry Applications, 2005, 41(2): 576-584.
  • 9Busse D, Erdman J, Kerkman R, et al. Systemelectrical parameters and their influence effect on bearing currents[J]. IEEE Transactions on Industry Applications, 1997, 33(2): 577-584.
  • 10Rajendra N, Thomas A, Nondahl, Michael J, et al. Circuit model for shaft voltage prediction in induction.motors fed by PWM-based AC drives[J]. IEEE Transactions on Industry Applications, 2003, 39(5): 1294-1299.

引证文献7

二级引证文献54

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部