摘要
In-situ vane shear test is frequently performed to determine shear strength for slope stability analysis in Tianjin New Harbor.However,the soil shear strength varies with the shear plane orientation.A possible means to reduce the effect of directional dependency of shear strength is to convert the in-situ vane shear strength into undrained shear strength parameters.A method of converting in-situ vane shear strength into undrained shear strength parameters is presented.The shear strength parameters determined for all of the in-situ vane shear strengths are subjected to statistical regression analysis to take into consideration the possible effect of non-homogeneity in the soft clay deposit.Using the regressed shear strength parameters,slope stability analyses are performed for five existing soil slopes.The results of stability analyses indicate that the safety factors obtained from the converted parameters reflect the state of the slopes analyzed much better than those obtained from in-situ vane shear strength and laboratory consolidated-undrained and unconsolidated-undrained strength parameters.It is concluded that the presented methsod of determining undrained shear strength parameters for in-situ vane shear strength is effective.
In-situ vane shear test is frequently performed to determine shear strength for slope stability analysis in Tianjin New Harbor.However,the soil shear strength varies with the shear plane orientation.A possible means to reduce the effect of directional dependency of shear strength is to convert the in-situ vane shear strength into undrained shear strength parameters.A method of converting in-situ vane shear strength into undrained shear strength parameters is presented.The shear strength parameters determined for all of the in-situ vane shear strengths are subjected to statistical regression analysis to take into consideration the possible effect of non-homogeneity in the soft clay deposit.Using the regressed shear strength parameters,slope stability analyses are performed for five existing soil slopes.The results of stability analyses indicate that the safety factors obtained from the converted parameters reflect the state of the slopes analyzed much better than those obtained from in-situ vane shear strength and laboratory consolidated-undrained and unconsolidated-undrained strength parameters.It is concluded that the presented methsod of determining undrained shear strength parameters for in-situ vane shear strength is effective.
