期刊文献+

混杂纤维复合材料的平面剪切性能 被引量:6

Study on In-plane Shear Property of Hybrid Fiber Composites
下载PDF
导出
摘要 研究了基体韧性和铺层方式对玻璃纤维、碳纤维及其混杂纤维复合材料平面剪切性能的影响。结果表明 ,玻璃、碳及其混杂纤维复合材料的平面剪切应力 -应变曲线均具有非线性特征 ;在脆性基体中选用混杂结构 ,其复合材料的剪切性能具有正的混杂效应。 In the article, we studied the effect of matrix toughness and stack sequence on in-plane shear properties of the composites reinforced with glass fiber, carbon fiber and hybrid fiber. The results shows that the stress-strain curves of the composites were nonlinear and the hybrid fiber composites had a positive hybrid effect when the brittle matrix was used.
出处 《纤维复合材料》 CAS 2004年第3期9-11,共3页 Fiber Composites
关键词 混杂纤维复合材料 应变曲线 混杂效应 平面 剪切性能 碳纤维 玻璃纤维 铺层方式 基体 韧性 matrix toughness, stack sequence, hybrid fiber, composite, in-plane shear, hybrid effect
  • 相关文献

参考文献10

二级参考文献15

  • 1刘政,刘小梅,周彼德.纤维增强金属基复合材料耐磨机制的研究[J].热加工工艺,1995,24(1):3-5. 被引量:5
  • 2周春华,刘威,李学闵,范敏.高密度聚乙烯纤维表面活化及其与环氧复合材料的界面[J].材料研究学报,1996,10(6):669-672. 被引量:8
  • 3Selden RB. Fracography of carbon/epoxy angle- ply laminates[C]. ICCM- IV, 1982,1525~1533.
  • 4Remesh Talreja. Transverse cracking and stiffness reduction in composite laminates[J] .Journal of Composite Materials, 1983, 19:355~375.
  • 5Park R and Jang J. Stacking sequence effect of aramid - UHMPE hybrid composites by flexural test method[J]. Polymer Testing, 1997, 16:549 ~562.
  • 6Park R and Jang J. Performance improvement carbon fiber/polyethylene fiber hybrid composites[J]. J Mater. Sci., 1999, 34:2903~2910.
  • 7Rotem A and Hashin Z. Failure modes dangle- ply laminates[J]. Journal of Composite Materials, 1975, 9:191~206.
  • 8周春华,工程塑料应用,1996年,24卷,3期,5页
  • 9严立(译),材料的磨损与硬度,1984年
  • 10林尚安,高分子化学,1984年

共引文献39

同被引文献47

引证文献6

二级引证文献17

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部