期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

粉末冶金低合金钢的制备和性能研究进展 被引量：3

Preparation and Properties of P/M Low Alloy Steels
下载PDF
导出
摘要 分别从粉末制备、成形工艺、烧结工艺及其组织控制等方面较系统地介绍了国内外粉末冶金低合金钢的制备情况,并展望了其将来的研究方向和前景。 This paper overviews the preparation and properties of P/M low alloy steels both at home andabroad,in terms of powder preparation,shape process,sintering process and mierostructure control etc.The researchorientation is put forward and future of P/M low alloy steels predicted.
作者 姜峰 李益民 邓忠勇
机构地区 中南大学粉末冶金国家重点实验室 湖南英捷高科技有限公司
出处 《材料导报》 EI CAS CSCD 2004年第6期39-42,50,共5页 Materials Reports
基金 国家863高科技计划项目(2001AA337050) 国家自然科学基金(50044012) 全国优秀博士论文作者专项资助基金项目(200135)
关键词 粉末冶金 低合金钢 制备 性能 研究进展 low alloy steel P/M preparation property
分类号 TF125.1 [冶金工程—粉末冶金]
  • 相关文献

参考文献23

  • 1Tracey V A. Nickel sintered steel: developments, status and prospects. Capus J M, German R M, eds. Adv Powder Metall Part Mater- 1992, Princeton: MPIF, 1992,5: 303
  • 2Trudel Y. QMP expands capacity and product range. Met Powder Rep, 1995, 50(11) :32
  • 3Mc Dermott M J. P/M parts fabrication experience with ANCORBOND (Binder Treated) premixes. Andreotti E R,McGeehan P J, eds. Advances in Powder Metallurgy,Princeton :MPIF, 1990, 1: 209
  • 4Narasimhan K S V L, Tengzelius J. P/M low-alloy steelalloying methods and continuous improvement. Capus J M,German R M, eds. Adv Powder Metall Part Mater-1992,Princeton: MPIF, 1992, 5:153
  • 5James W B,et al. High performance ferrous PM materials:the effect of alloying method on dynamic properties. Met Powder Rep, 1984, (4) :251
  • 6Yamato N, Dgura K. Cr-alloyed powders with low O2 content made by vacuum annealing. Met Powder Rep, 1989,44(1):46
  • 7Minegishi T. Mechanical properties of sintered compacts made from low-oxygen Cr-alloyed steel powder. Capus J M, German R M, eds. Adv Powder Metall Part Mater1992, Princeton:MPIF, 1992, 5:53
  • 8Hwang K S, Hsiao M Y. Mechanical properties of Fe-Ni injection molded parts made from composite powders.Booker P, Gaspervich J, German R M, eds. Powder Injection Molding Symposium-1992, Princeton :MPIF, 1992: 53
  • 9Furukimi O, Yano K, Takajo S. New composite-type alloyed 2%Ni-1%Mo steel powder for ultrahigh-strength sintered components. Pease Ⅲ L F, Sansoucy R J, eds.Adv Powder Metall Part Mater-1991, Princeton: MPIF,1991,5:59
  • 10Schaeffler D J, Lawley A, Causton R J. Low carbon P/M alloy steels. Capus J M, German R M, eds. Adv Powder Metall Part Mater-1992, Princeton :MPIF, 1992,5: 93

共引文献20

同被引文献24

  • 1李艳萍,胡学晟,果世驹.含Fe-Mo-B预合金粉的铁基合金温压行为[J].粉末冶金材料科学与工程,2005,10(5):305-308. 被引量：6
  • 2严旺生.铬锰系不锈钢发展与电解金属锰[J].中国锰业,2005,23(3):7-10. 被引量：8
  • 3FAN Jian-wen,DAI Xiao-li,XIE Rui-ping,ZHANG Wei-xu,WANG Zu-bin.Surface Ferrite Grain Refinement and Mechanical Properties of Low Carbon Steel Plates[J].Journal of Iron and Steel Research(International),2006,13(4):35-39. 被引量：4
  • 4陈华,郭美娜,曹晓杰,刘勇兵.铬对铁基预合金粉末烧结组织和性能的影响[J].热加工工艺,2006,35(18):4-6. 被引量：5
  • 5李邦建.赵文强.一种高性能粉末冶金温压从动齿轮及其生产方法:中国.200910017080.0[P].2009-12-09.
  • 6沈元勋.肖志瑜.方亮.等.部分扩散预合金温压铁-铜-镍-钼-碳材料的组织与性能[J].机做工程材料.2007.31(9):30-33.
  • 7XIAO Z Y, KE M Y. FANG L, et al. Die wall lubricted warm compacting and sintering behaviors of pre-mixed Fe-Ni-Cu-Mo-C powders[J]. Journal of Materials Processing Tech nology. 2009,209 ( 9 ) :1527-4530.
  • 8NARASIMHAN K S. Sintering of powder mixtures and the growth of ferrous powder metallurgy[J]. Materials Chemistry and Physics,2001,67( 1 ) :56-65.
  • 9李冬春.田永君.陈世镇.等.合金元素铜和镍对铸铁短纤维烧结特性的影响[J].粉未冶金技术,1992,10(3):204-208.
  • 10GETHING B A, HEANEYA D F. KOSS D A, et al. The effect of nickel on the mechanical behavior of molybdenum P/ M sTeels[J]. Materials Science and Engineering,2005,390( 1 ):19-26.

引证文献3

二级引证文献7

材料导报
2004年 第6期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部