Chemistry principles for thermoplastic polymer binder formula selection for powder injection molding

Chemistry principles for thermoplastic polymer binder formula selection for powder injection molding

下载PDF

导出

摘要 The polymer binder selection is one of the very important aspects for the powder injection molding. However,even nowadays the binder selection is still mainly performed by try and error method. Six commercial or intensive studied binder fo rmulas were analyzed according to state diagram and chemical characteristics of ingredients in each binder formula. In addition,the interactions between the bi nder components and additives were also taken into account. Based on the analysi s,the optimum binder formula was selected and some selection criterions were pu t forward for the binder and additives. The polymer binder selection is one of the very important aspects for the powder injection molding. However,even nowadays the binder selection is still mainly performed by try and error method. Six commercial or intensive studied binder fo rmulas were analyzed according to state diagram and chemical characteristics of ingredients in each binder formula. In addition,the interactions between the bi nder components and additives were also taken into account. Based on the analysi s,the optimum binder formula was selected and some selection criterions were pu t forward for the binder and additives.

作者梁叔全唐艳黄伯云李少强

机构地区 School of Materials Science and Engineering State Key Laboratory of Powder Metallurgy

出处《中国有色金属学会会刊：英文版》 CSCD 2004年第4期762-768,共7页 Transactions of Nonferrous Metals Society of China

基金 Project(5 0 2 740 77)supportedbytheNationalNaturalScienceFoundationofChina projectsupportedbytheNationalKeyFundamentalResearchandDevelopmentProgramofChina

关键词粉末注射成型粉末冶金 PIM 热塑性成型冶金原理 binder chemistry powder injection molding

分类号 TF125.2 [冶金工程—粉末冶金] TG146.4 [金属学及工艺—金属材料]

引文网络
相关文献

参考文献31

1[1]German M R. Powder Injection Molding[M]. NJ:MPIF, 1990. 1 - 20.
2[2]Mutsuddy B C, Rord R G. Ceramic Injection Molding[M]. London, Glasgow, Weiheim, New York, Tokyo, Melbourne, Madras: CHAPMAN HALL,1995. 1 - 26.
3[3]LIANG S Q, HUANG B Y. Advances in powder injection molding[A]. SONG Jian, YIN Rui-yu. Proc of Inter Conf On Eng ＆ Techn[C]. Vol. 2. Beijing:New World Press, 2000. 1206 - 1211.
4[4]Aparecido C G. Metallic powder injection molding using low pressure[J]. Materials Processing Technology, 2001, 118: 193-197.
5[5]Supati R, Loh N H, Khor K A, et al. Mixing and characterization of feedstock for powder injection molding[J]. Materials Letters, 2000, 46:109 - 115.
6[6]Metz S A, Flemings M C. A fundamental study of hot tearing[A]. Flemings C. Symposium on Solidification and Materials Processing[C]. MA, USA: USA Publishers, Cambridge, 2001. 181- 188.
7[7]LIANG S Q, HUANG B Y, QU X H, et al. High techniques and new concepts in metal powder injection molding[J]. High Technology Letters, 1996(12): 54-58.
8[8]Ebenhoch J. Ceramic injection molding with a polyacetal based binder system [ A]. Press-information BASF. Advances in Powder Metallurgy and Particulate Materials[C]. MPIF, 1993. 45- 56.
9[9]Aunette S A. Powder injection molding for metal and ceramics[A]. Press-Information BASF, K'95 Trade Press Conference[C]. Ludwigshafen, Germey, 1995.29 - 30.
10[10]Anwar M Y, Messer P F, Ellis B, et al. Injection molding of 316 stainless steel powder using a novel binder system[J]. Powder Metallurgy, 1995, 38(2):113 - 119.

1High Quality Insulating Refractories for Indus—try Frunace[J].China's Refractories,2002,11(1):41-42.
2GUO Shibo,DUAN Bohua,HE Xinb,QU Xuanhui.Powder injection molding of pure titanium[J].Rare Metals,2009,28(3):261-265. 被引量：9
3范景莲,黄伯云,曲选辉.Effects of milling and active surfactants on rheological behavior of powder injection molding feedstock[J].中国有色金属学会会刊：英文版,2001,11(2):196-199. 被引量：3
4李松林,黄伯云,李益民,曲选辉.Development of wax-oil-polyethylene binder for Fe-2Ni powder injection molding[J].中国有色金属学会会刊：英文版,2000,10(4):473-476.
5Shan-jie Yi,Hai-qing Yin,Ke Chen,Dil-Faraz Khan,Qing-jun Zheng,Xuan-hui Qu.Microstructure and properties of nano-TiN modified Ti(C,N)-based cermets fabricated by powder injection molding and die pressing[J].International Journal of Minerals,Metallurgy and Materials,2013,20(11):1115-1121.
6WANG Xue-lun 1,FU Li-ming 2,WANG Wei 3,JIA Zhi-xin 1 (1.Rizhaosteel Technology Center,Rizhao Iron and Steel Co Ltd.Rizhao 276806,China,2.School of Materials Science and Engineering,Shanghai Jiaotong University,Shanghai 200240 China,3 Department of Structural Steels,Baosteel Research Institute,Shanghai 201900,China).Modeling Study of the Particle Pinning Effect on the Grain Boundary Movement[J].Journal of Iron and Steel Research International,2011,18(S1):342-345.
7祝宝军,曲选辉,陶颖.A novel binder and binder extraction method for powder injection molding of tungsten cemented carbide[J].中国有色金属学会会刊：英文版,2003,13(2):262-266. 被引量：1
8LIU Fu-tian SONG Shi-xue YANG Jun-ru HUANG Wei-ling HUANG Chuan-zhen CHENG Xin LI Zhao-qian.Influence of alloy ingredients on mechanical properties of ternary boride hard alloy clad materials[J].中国有色金属学会会刊：英文版,2004,14(z1):482-486. 被引量：1
9SHENG Da.Kinetic Factors for Intensive Reaction of Magnesium-Based Spheroidiser in Hot Metal[J].Journal of Iron and Steel Research International,2005,12(1):9-11.
10郑洲顺,曲选辉,李云平,雷长明,段柏华.Fractal phenomena in powder injection molding process[J].中国有色金属学会会刊：英文版,2003,13(5):1112-1118.

中国有色金属学会会刊：英文版

2004年第4期

浏览历史

内容加载中请稍等...

Chemistry principles for thermoplastic polymer binder formula selection for powder injection molding

参考文献31

相关作者

相关机构

相关主题

浏览历史