期刊文献+

A study on HAZ’s microstructure and grain size of 10CrNi3MoV steel

A study on HAZ’s microstructure and grain size of 10CrNi3MoV steel
下载PDF
导出
摘要 This paper deals with microstructure and grain size of HAZ of 590 MPa high strength ship-structure steel with welding simulator. While t 8/5 time is short, 10CrNi3MoV steel’s microstructure of coarse grain heat-affected zone (CGHAZ) is lath martensite structure and a small amount of twined martensite structure; while t 8/5 time is long, it is mainly granular bainite structure. After second thermal cycle with peak temperature between critical temperature Ac 1′ and Ac 3′, CGHAZ has the inheritance of coarse grain and coarse microstructure. Welding energy input (determined by t 8/5 time) has an effect on the inheritance of coarse microstructure, but no influence on the inheritance of coarse grain. In detail, with a shorter t 8/5 time, there is an inheritance of coarse microstructure and grains. With a longer t 8/5 time, there is only the inheritance of coarse grains. While t 8/5 increases, the scope of temperature of causing it diminishes. Therefore, the inheritance of coarse microstructure connects with the high speed of heating and cooling. This paper deals with microstructure and grain size of HAZ of 590 MPa high strength ship-structure steel with welding simulator. While t 8/5 time is short, 10CrNi3MoV steel’s microstructure of coarse grain heat-affected zone (CGHAZ) is lath martensite structure and a small amount of twined martensite structure; while t 8/5 time is long, it is mainly granular bainite structure. After second thermal cycle with peak temperature between critical temperature Ac 1′ and Ac 3′, CGHAZ has the inheritance of coarse grain and coarse microstructure. Welding energy input (determined by t 8/5 time) has an effect on the inheritance of coarse microstructure, but no influence on the inheritance of coarse grain. In detail, with a shorter t 8/5 time, there is an inheritance of coarse microstructure and grains. With a longer t 8/5 time, there is only the inheritance of coarse grains. While t 8/5 increases, the scope of temperature of causing it diminishes. Therefore, the inheritance of coarse microstructure connects with the high speed of heating and cooling.
出处 《China Welding》 EI CAS 2003年第2期162-167,共6页 中国焊接(英文版)
关键词 high strength steel heat-affected zone MICROSTRUCTURE grain size high strength steel,heat-affected zone,microstructure,grain size
  • 相关文献

参考文献7

  • 1Crowther D N,et al.The effect of vanadium and niobium on the properties and microstructure of the intercritically reheated coarse grained heat affected zone in low carbon microalloyed steels[].ISIJ International.2001
  • 2Deb P,et al.Transmission electron microscopy characterizations of preheated and non-preheated shielded metal arc weldments of HY-80 steel[].Journal of Materials Science.1986
  • 3Yu Qizhan.Welding brittle behavior of steel[]..1992
  • 4Mlomozik.Effect of the welding thermal cycles on the structure changes in the heat affected zone and on its properties in joints welded in low-alloy steels[].Welding International.2000
  • 5Wei Jinshan,Zhang Tianhong.Effect of secondary weld thermal cycle on structure and properties[].China Welding.2001
  • 6Davis C L,et al.Effect of cooling rate on intercritically reheated microstructure and toughness in high strength low alloy steel[].Journal of Materials Science.1993
  • 7Bhole S D,et al.Influence of GTA welding thermal cycles on HSLA-100 steel plate[].Canadian Metallurgical Quarterly.1996

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部