期刊文献+

机械和水力联合破岩的力学模型 被引量:4

A Combined Rock Breakage Mechanics Model of Mechanical Teeth and Water Jet
下载PDF
导出
摘要 从机械、水力联合破岩时岩石所处的特定力学条件入手,建立了破碎岩石的基本力学模型;分析了联合破岩时岩石裂纹形成与扩展的条件;导出了岩石裂纹扩展的最可能方向,并通过实验进行了验证;得出了实验条件下射流的最佳喷射角为30°左右。 From the special conditions of combined rock breakage of mechanical teech and water jet. the basic rock breakage mechanics models have been found, the forming and expanding conditions of cracks have been analysed and the spreading orientation of rock cracks has been known The results are proven by experiments. The best jet angle is about 30 degree in the experiments.
出处 《江汉石油学院学报》 CSCD 北大核心 1993年第4期53-57,共5页 Journal of Jianghan Petroleum Institute
关键词 应力分析 钻井 岩石破裂 drilling rocks stress analysis [mechanics model] rock rupture [jet angle]
  • 相关文献

参考文献1

同被引文献32

  • 1李根生,宋剑.双射流流动特性数值模拟和PIV实验研究[J].自然科学进展,2004,14(12):1464-1468. 被引量:17
  • 2李根生,沈忠厚,周长山,张德斌,廖华林.自振空化射流研究与应用进展[J].中国工程科学,2005,7(1):27-32. 被引量:40
  • 3孙清德,汪志明,于军泉,张文华.高压水射流破岩规律的数值模拟研究[J].岩土力学,2005,26(6):978-982. 被引量:34
  • 4张文华,汪志明,于军泉,孙清德.高压水射流-机械齿联合破岩数值模拟研究[J].岩石力学与工程学报,2005,24(23):4373-4382. 被引量:20
  • 5KUZMICH I A.Some relationships in the coal penetration by high pressure thin water jets[C].1st International Symposium on Jet Cutting Technology,1972,Coventry,England:E1-1.
  • 6NIKONOV G P.Coal and rock penetration by fine,continuous high pressure water jets[C].1st International Symposium on Jet Cutting Technology,1972,Conventry,England:E2-9.
  • 7REHBINDER G.Some aspects on the mechanism of erosion of rock with a high speed water jet[C].3rd International Symposium on Jet Cutting Technology,1976,Chicago,America:E1-1.
  • 8CROW S C.The mechanics of hydraulic rock cutting[C].2nd International Symposium on Jet Cutting Technology,1974,Cambridge,England:B1-1.
  • 9Mclean R H. Crossflow and impact under jet bits[J]. JPT, 1964,16(11):1299-1306.
  • 10Maurer W C, Heilhecke J K , Love W W. High pressure drilling [J]. JPT, 1973,25(7) :851-859.

引证文献4

二级引证文献153

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部