期刊文献+

Amorphous in a Zr-IQC-DQC pseudo-ternary alloy system

Amorphous in a Zr-IQC-DQC pseudo-ternary alloy system
下载PDF
导出
摘要 A pseudo-ternary alloy system was constructed by combining an icosahedralquasicrystal (IQC), a decagonal quasicrystal (DQC), and Zr into one alloy system. Differentproportions of Zr were added to pseudo-binary alloy IQC_(80)DQC_(20) (mass fraction in %);Structural evolution in these alloys was discussed. An amorphous alloy composition was found in thissystem and a melt-spinning amorphous alloy was produced in this composition. Through DSC analysis,the amorphous alloy exhibits high glass forming ability comparable to that of the InoueZr_(65)Al_(7.5)Cu_(17.5)Ni_(10) amorphous alloy. A pseudo-ternary alloy system was constructed by combining an icosahedralquasicrystal (IQC), a decagonal quasicrystal (DQC), and Zr into one alloy system. Differentproportions of Zr were added to pseudo-binary alloy IQC_(80)DQC_(20) (mass fraction in %);Structural evolution in these alloys was discussed. An amorphous alloy composition was found in thissystem and a melt-spinning amorphous alloy was produced in this composition. Through DSC analysis,the amorphous alloy exhibits high glass forming ability comparable to that of the InoueZr_(65)Al_(7.5)Cu_(17.5)Ni_(10) amorphous alloy.
出处 《Rare Metals》 SCIE EI CAS CSCD 2004年第1期68-73,共6页 稀有金属(英文版)
基金 This work wax financially supported by the French-Chinese Advanced Research Program on Materials (PRA MX 99/04) and by the National Natural Science Foundation of China (Nos. 59971014 and 50071013)
关键词 amorphous alloy pseudo-ternary alloy system icosahedral quasicrystal decagonal quasicrystal glass forming ability amorphous alloy pseudo-ternary alloy system icosahedral quasicrystal decagonal quasicrystal glass forming ability
  • 相关文献

参考文献13

  • 1[1]Koster U., Meinhardt J., Roos S., and Liebertz H.,Formation of quasicrystals in bulk glass forming Zr-Cu-Ni-AI alloys [J], Appl. Phys. Lett., 1996, 69:179.
  • 2[2]Murty B.S., Ping D.H., Hono K., and Inoue A., Icosahedral phase formation by the primary crystallization of a Zr-Cu-Pd metallic glass [J], Scripta mater.,2000, 43: 103.
  • 3[3]Shen Y., Poon S.J., and Shiflet G.J., Crystallization of icosahedral phase from glassy Pd-U-Si alloys [J],Phys. Rev. B, Condens. Matter, 1986, 34: 3516.
  • 4[4]Inoue A., Bizen Y., and Masumoto T., Quasicrystalline phase in Al-Si-Mn system prepared by annealing of amorphous phase [J], Metall. Trans. A, 1988, 19A:383.
  • 5[5]Tsai A.P., Inoue A., and Masumoto T., Stable quasicrystals in Al75Cu15V10 prepared by crystallization of an amorphous phase [J], Jpn. J. Appl. Phys., 1987, 26:1994.
  • 6[6]Sibirtsev S.A., Chebotnikov V.N., Molokanov V.V.,and Kovneristyi Yu.K., Quasicrystals in the Ti-Zr-Ni System [J], JETP Len. (USSR), 1988, 47: 744.
  • 7[7]Alisova S.P., Kovneristyi Yu.K., Lazareva J.E., and Budberg P.B., Characteristics of formation of quasicrystalline phase in alloys based on intermetallic compounds of titanium [J], Doklady Akademii Nauk SSSR, 1990, 315:116.
  • 8[8]Koster U., Meinhardt J., Roos S., and Rtidiger A., Influence of oxygen contents on nanocrystallization of Co33Zr67 and Zr65Cul7.5Ni10A17.5 alloys [J], Mater. Sci.Forum., 1996, 311: 225.
  • 9[9]Inoue A., Stabilization of metallic supercooled liquid and bulk amorphous alloys [J], Acta mater., 2000, 48:279.
  • 10[10]Lei Y., Calvo-Dahlborg M., Dubois J.M., Hei Z.K.,Weisbecker P., and Dong C., Structure and morphology of [icosahedral Al62Cu25.5Fe12.5]100_x [decagonal Al70Co15Ni15]x alloys, for x = 10* (0~3 and 5~10) [J], J. Non-Cryst. Solids, 2003, 330: 39.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部