期刊文献+

Effect of Nb on Structure and Mechanical Properties of Chilled Cast Iron at Room and Elevated Temperatures

Effect of Nb on Structure and Mechanical Properties of Chilled Cast Iron at Room and Elevated Temperatures
下载PDF
导出
摘要 Effect of Nb on microstructure and mechanical properties of chilled cast iron at room and elevated temperatures isstudied in this research. The results demonstrate that the cast structure and mechanical properties of chilled castiron at room and elevated temperatures are improved with the addition of trace amount of Nb. However, if Nb wasadded too much, the cast structure and mechanical properties of chilled cast iron would deteriorate. The suitablecontent of Nb in chilled cast iron is about 0.05% (mass fraction). Except the dissolution in the matrix of cast ironthe excessive Nb will form Nb-rich phases in three morphologies. Those are lumpy NbC, complicated strip-like phaseand compound with pearlite structure. Effect of Nb on microstructure and mechanical properties of chilled cast iron at room and elevated temperatures isstudied in this research. The results demonstrate that the cast structure and mechanical properties of chilled castiron at room and elevated temperatures are improved with the addition of trace amount of Nb. However, if Nb wasadded too much, the cast structure and mechanical properties of chilled cast iron would deteriorate. The suitablecontent of Nb in chilled cast iron is about 0.05% (mass fraction). Except the dissolution in the matrix of cast ironthe excessive Nb will form Nb-rich phases in three morphologies. Those are lumpy NbC, complicated strip-like phaseand compound with pearlite structure.
出处 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2004年第3期301-303,共3页 材料科学技术(英文版)
关键词 NB Chilled cast iron STRUCTURE PROPERTIES Nb Chilled cast iron Structure Properties
  • 相关文献

参考文献7

  • 1[1]K.B.Kang and O.Kwon: Scripta Mater., 1997, 36(11), 1303.
  • 2[2]V.Kuzucu and M.Aksov: J. Mater. Proc. Technol., 1998,82(1), 165.
  • 3[3]A.M.El-Wazri, F.Hassani and S.Yue: Canadian Metallurgical Quarterly, 2000, 39(1), 55.
  • 4[4]S.F.Medina and A.Quispe: ISIJ International, 2001, 41(7),774.
  • 5[5]C.Huang and E.B.Hawbolt: Canadian Metallurgical Quarterly,2000, 39(3), 369.
  • 6[6]B.Piekarski and M.Garbiak: Metalurgija, 2002, 41(2), 77.
  • 7[7]N.Kataoka: Bulletin of The Japan Institute of Metals, 1993,32(4), 223.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部