基于Matlab的快速原型仿真系统

The Fast Prototype Simulation System Based on Matlab

快速原型最根本的目的在于能够快速容易的进行系统方案设计和适时的硬件测试。同时 由于采用系统级设计方法简单易懂的框图结构来描述整个系统,避免了文字性规范的诸多缺点,也改善了项目的继承延续性问题。主要介绍了采用Matlab软件和C6000数字信号处理器实现数字信号的采集与处理。并应用代码自动生成工具将Matlab软件和C6000结合,实现了数字信号处理高级算法到应用处理硬件的无缝连接,从而为项目的前期开发和算法验证提供了一个良好的方法。

The fast prototype is most basically used to design system project and test hardware quickly and easily. It can avoid many weakness of the literal criterion and improve the item抯 inheritable character and continuity because it adopts the frame diagram construction which is easily understood to describe the whole system. In particular, it is introduced primarily the realization of the collection and process of digital signal based on software Matlab and digital signal processor C6000. In addition, automatic code generator is applied to combine software Matlab with C6000 and it realizes the connection between high-level arithmetic and applied hardware of digital signal process which provides a favorable means to prophase development and arithmetic validity of the item.