期刊文献+

SURFACE MODIFICATION OF MICROPOROUS POLYPROPYLENE MEMBRANES BY GRAFT POLYMERIZATION OF N,N-DIMETHYLAMINOETHYL METHACRYLATE 被引量:4

SURFACE MODIFICATION OF MICROPOROUS POLYPROPYLENE MEMBRANES BY GRAFT POLYMERIZATION OF N,N-DIMETHYLAMINOETHYL METHACRYLATE
下载PDF
导出
摘要 Surface modification of microporous polypropylene hollow fiber membranes was performed by radical-induced graft polymerization of N,N-dimethylaminoethyl methacrylate (DMAEMA). The influences of temperature, monomer concentration and pre-adsorbed amount of benzoyl peroxide on grafting degree were studied respectively. It was found that the appropriate graft temperature was 75 'C, at which the grafting degree was the highest and the hydrolytic decomposition of DMAEMA the lowest. Scanning electron photomicrography and the average pore diameters of the modified membranes demonstrated that part of the micropores on the membrane surface was plugged by the grafted polyDMAEMA chains, especially at high grafting degree. Contact angle and water swelling experiments showed that a moderate grafting degree could improve the hydrophilicity of the membranes. In the range of 11.3%-12.0% grafting degree, the water swelling percentage reached its maximum (51.1%) and the contact angle reached its minimum (74 degrees). The bovine serum albumin (BSA) adsorption experiment indicated that the grafted polyDMAEMA had a dual effect on protein adsorption. At the first stage, the BSA adsorption decreased with increasing of DMAEMA grafting degree. As the interaction between BSA and polyDMAEMA on membrane surface increased, the BSA adsorption increased with increasing of DMAEMA grafting degree. Surface modification of microporous polypropylene hollow fiber membranes was performed by radical-induced graft polymerization of N,N-dimethylaminoethyl methacrylate (DMAEMA). The influences of temperature, monomer concentration and pre-adsorbed amount of benzoyl peroxide on grafting degree were studied respectively. It was found that the appropriate graft temperature was 75 'C, at which the grafting degree was the highest and the hydrolytic decomposition of DMAEMA the lowest. Scanning electron photomicrography and the average pore diameters of the modified membranes demonstrated that part of the micropores on the membrane surface was plugged by the grafted polyDMAEMA chains, especially at high grafting degree. Contact angle and water swelling experiments showed that a moderate grafting degree could improve the hydrophilicity of the membranes. In the range of 11.3%-12.0% grafting degree, the water swelling percentage reached its maximum (51.1%) and the contact angle reached its minimum (74 degrees). The bovine serum albumin (BSA) adsorption experiment indicated that the grafted polyDMAEMA had a dual effect on protein adsorption. At the first stage, the BSA adsorption decreased with increasing of DMAEMA grafting degree. As the interaction between BSA and polyDMAEMA on membrane surface increased, the BSA adsorption increased with increasing of DMAEMA grafting degree.
出处 《Chinese Journal of Polymer Science》 SCIE CAS CSCD 2004年第4期369-377,共9页 高分子科学(英文版)
基金 The work was supported by the National Natural Science Foundation of China (Grant No. 20074033) and the High-TechResearch and Development Program of China (Grant no. 2002AA601230).
关键词 Polypropylene hollow fiber membrane N N-Dimethylaminiethyl methacrylate Surface modification Graft polymerization BSA adsorption Polypropylene hollow fiber membrane, N,N-Dimethylaminiethyl methacrylate, Surface modification, Graft polymerization, BSA adsorption
  • 相关文献

参考文献26

  • 1"Material Science of Synthetic Membranes", ed. by Lloyd, D.R., ACS Symposium Series 269, American ChemicalSociety, Washington, DC, 1985, Chapter 1.
  • 2Wang D.M., Wu, T.T., Lin, F.C., Hou, J.Y. and Lai, J.Y., J. Membr. Sci., 2000, 169:39.
  • 3Brown, W.R., Hilal, N., Lovitt, R.W. and Wright, C.J., J. Membr. Sci., 1999, 154:205.
  • 4Wang, Y., Kim, J.H., Choo, K.H., Lee, Y.S. and Lee, C.H., J. Membr. Sci., 2000, 139:269.
  • 5Gabriel, E.M. and Gillberg, G.E., J. Appl. Polym. Sci., 1993, 48:2081.
  • 6Garg, D.H., Lenk, W., Berwald, S., Lunkwitz, K., Simon, F. and Eichhom, K.J., J. Appl. Polym. Sci., 1996, 60:2087.
  • 7Xu, Z.K., Wang, J.L., Shen, L.Q., Meng, D.F. and Xu, Y.Y., J. Membr. Sci., 2002, 196:221.
  • 8Shim, J.K., Na, H.S., Lee, Y.M., Huh, H. and Nho, Y.C., J. Membr. Sci., 2001, 190:215.
  • 9Kim, M. and Saito, K., Radiat. Phys. Chem., 2000, 57:167.
  • 10Liang, L., Shi, M., Viawanathan, V.V., Peurrung, L.M. and Young, J.S., J. Membr. Sci., 2000, 177:97.

同被引文献9

引证文献4

二级引证文献20

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部