期刊文献+

合金产品中镍释放率的检测方法 被引量:3

Analytical Method for the Nickel Release Rate in White Gold Alloys
下载PDF
导出
摘要 本文叙述了一个白K金合金的镍释放率检测方法。配制一种人工汗液,将含镍的合金样品浸入一个星期后用火焰原子吸收光谱仪检测溶液中的浸出镍的含量,单位为μg/cm2/week。使用合理的调整系数,得出该合金样品的镍释放率。通过比对实验,证明该方法现实可行。 This article studies the method for nickel release in white gold alloys. Nickel-containing alloys were placed to the artificial sweat solution for a week. The nickel content in the artificial sweat solution was measured with a flame A A machine. The nickel release rate was calculated in μ g/cm2/week and adjusted by a reasonable factor. This method is proved to be practical alternative.
出处 《上海计量测试》 2004年第5期17-19,共3页 Shanghai Measurement and Testing
关键词 合金产品 镍释放率 检测方法 白K金合金 人工汗液 Nickel, Nickel Release Rate, White Gold Alloys
  • 相关文献

参考文献2

  • 1[1]M.Poliero "White Gold Alloys For Investment Casting"Technology,31,Spring,2001
  • 2[2]P.Rotheram "White Golds - Meeting the Demands of International Legislation" Gold Technology,27,November,1999

同被引文献13

  • 1郑存江.地质标准物质不确定度评估方法初探[J].岩矿测试,2005,24(4):284-286. 被引量:27
  • 2董波,杨利营,叶丹琴,陆燕,华玉林,印寿根.有机电致发光器件的封装技术[J].液晶与显示,2007,22(2):176-181. 被引量:11
  • 3曹楚南.腐蚀电化学[M].北京:化学工业出版社,1994.133-133.
  • 4Uhlig H H 李相怡等(译).腐蚀与腐蚀控制:腐蚀科学和腐蚀工程导论[M].北京:石油工业出版社,1994..
  • 5[4]Osada T,Kugler Th,Broms P,et al.Polymer-based light-emitting devices:Investigations on the role of indium tin oxide (ITO) electrode[J].Synth Met,1998,96:77-80.
  • 6[5]Van de Meerakker J,ter Veen W.Reductive corrosion of ITO in contact with Al in alkaline solutions[J].J Electrochem Soc,1992,139:385-390.
  • 7[6]左景伊,左 禹.腐蚀数据与选材手册[M].北京:化学工业出版社,2003:308.
  • 8[11]克舍 H.金属腐蚀[M].北京:化学工业出版社,1984:265.
  • 9[12]Folcher G,Cachet H,Froment M,et al.Anodic corrosion of indium tin oxide films induced by the electrochemical oxidation of chlorides[J].Thin Solid films,1997,301:242-248.
  • 10[1]Tang C W,VanSlyke S A.Organic electroluminescent diodes[J].Appl Phys Lett,1987,51(12):913-915.

引证文献3

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部