期刊文献+

热载荷下粘弹性功能梯度材料薄板的准静态响应 被引量:2

QUASI-STATIC RESPONSE OF FUNCTIONALLY GRADED VISCO-ELASTIC PLATES UNDER THERMAL LOADS
下载PDF
导出
摘要 由热粘弹性功能梯度材料的本构方程出发,利用Laplace变换,通过引进薄板的“结构函数”和“热函数”,建立了各向同性薄板的数学模型.采用卷积双线性形式,给出了薄板准静态问题的简化Gurtin型泛函.在空域上和时域上分别采用Ritz法和Legendre插值法考察了温度变化和功能梯度对于薄板响应的影响. According to the constitutive relation of linear thermovisoelasticity, a mathematical model of viscoelastic FGM thin plates under thermal loads is set up with the help of Laplace transformation method and the introduction of “structure function” and “thermal function”. The corresponding simplified Gurtin type variational principle of FGM thin plates is presented by means of convolution bilinear forms. The influence of temperature variation and functional gradient of materials is investigated by combining the Ritz method in the spatial domain and the Legendre interpolation method in the temporal domain.
出处 《固体力学学报》 CAS CSCD 北大核心 2004年第4期479-482,共4页 Chinese Journal of Solid Mechanics
基金 上海市教委青年基金(01QN70) 国家自然科学基金(10172056) 上海市重点学科资助.
关键词 双线性形式 泛函 结构函数 准静态 功能梯度 卷积 LAPLACE变换 性功能 梯度材料 影响 thermoviscoelastic plates, FGM, variational principle, Legendre interpolation method
  • 相关文献

参考文献4

二级参考文献58

  • 1童隆长.用混合的欧拉-拉格朗日有限元法模拟体积塑性成形过程[J].塑性工程学报,1996,3(2):19-23. 被引量:2
  • 2曹志远 邹贵平.施工力学分析的时变力学基础.现代力学与科技进步[M].北京:清华大学出版社,1997.320.
  • 3王忠金.模锻过程的三维模拟及连杆终锻成形规律的研究:博士论文[M].吉林工业大学,1995..
  • 4陈军.虚拟模具制造及金属成形过程三维仿真技术研究:博士论文[M].上海交通大学,1996..
  • 5王广春.三维摆碾过程的刚塑性有限元模拟:博士论文[M].哈尔滨工业大学,1995..
  • 6单德彬.机匣挤压的三维数值数据:博士论文[M].哈尔滨工业大学,1996..
  • 7左旭 卫原平 等.十字轴多工位锻造三维CAE仿真[J].上海交通大学学报,1999,20(3):31-34.
  • 8黄毅坚 李国基.金属成形过程刚塑性有限元分析中的摩擦问题[J].模具技术,1986,(2):10-14.
  • 9[1]Koizumi M. The concept of FGM. Ceramic Trans. Functionally Gradient Materials, 1993, 34(1): 3~10
  • 10[2]Reddy J N, Chin C D. Thermoelastical analysis of functionally graded cylinders and plates. J Thermal Stresses, 1998, 21: 593~626

共引文献44

同被引文献14

引证文献2

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部