期刊文献+

基于有限元的坦克变速箱体模态分析 被引量:6

Modal Analysis for Box-body of Tank Gearbox by Finite ElementMethod
原文传递
导出
摘要 建立了坦克变速箱体详细的有限元模型,采用Lanczos算法对箱体结构进行了模态分析,计算出了箱体结构的前16阶非刚体模态的固有频率及相应振型.分析结果显示了箱体各部分结构振动的强弱分布以及抗振薄弱区,为下一步的动态响应及动态修正提供了必要的依据.该分析结果也为变速箱故障诊断提供了参考依据. In this paper, a detailed finite element model of the box-body of tank gearbox is established, and the modal analysis of the box-body is carried out by Lanczos algorithm. Through the analysis, the inherent frequencies and mode shapes of the first 16 modes are obtained respectively. The results of the relative distribution of the vibration magnitude in the box-body are given, which are valid enough to provide the foundation for the dynamic response evaluation and the dynamic modification. The analysis results also provide the reference foundation for identifying and locating the cause of tank gearbox faults.
出处 《装甲兵工程学院学报》 2004年第4期35-37,54,共4页 Journal of Academy of Armored Force Engineering
关键词 坦克变速箱 有限元 模态分析 <Keyword>tank gearbox finite element modal analysis
  • 相关文献

参考文献3

二级参考文献5

  • 1张红兵,杨世文,王海成.曲轴有限元自由模态分析[J].车用发动机,1996(2):53-56. 被引量:10
  • 2[1]Usuba Yo.The role of static and dynamic finite element analysis in designing low-noise cylinder blocks[J] SAE Transactions Section 3 Journal of Engines,1983,92:1 915~1 926.
  • 3[2]Busch G. Investigations on influence of engine block design features on noise and vibration[J].SAE Transactions Section 3 Journal of Engines, 1991,100:1 509~1 526.
  • 4[3]Okamura Hideo. Influence of crandshaft-pulley dimensions on crankshaft vibrations and engine-structure noise and vibrations[J].SAE Transactions,Section 3 Journal of Engines,1993,102:1 656~1 665.
  • 5靳卫新,陈国华,王海成,张保中.大功率柴油机机体三维模态分析[J].内燃机学报,1997,15(2):212-216. 被引量:22

共引文献23

同被引文献51

引证文献6

二级引证文献40

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部