摘要
选矿试验研究结果表明,会泽铅锌矿深部矿均可采用先硫后氧,先铅后锌、粗精矿再磨分离的原则工艺流程,当矿石氧化率变化时,只需对硫化钠及胺用量稍作调整,即可取得较好的选别指标。
The experimental results proved that the principle flow-sheet of separating sulfide ore and lead mineral before separating oxide ore and zinc mineral and followed by raw concentrate re-grinding and re-separation is generally suitable for the ore-body in deep level of Huize Lead-Zinc Mine.In the case that the oxidation ratio of ore changes,good operating results can also be achieved only by properly adjust the consumption of sodium sulfide and operating condition.
出处
《云南冶金》
2004年第6期9-16,共8页
Yunnan Metallurgy