摘要
Reliable surface treatment has been explored to improve the strength and wear resistance of aluminum alloy parts in automotives. Long duration time as well as long pre-sputtering time are required for plasma nitriding of aluminum or its alloys only with the thickness of a few micrometers. New plasma inner nitriding is proposed to realize the fast-rate nitriding of aluminum alloys. Al-6Cu alloy is employed as a targeting material in order to demonstrate the effectiveness of this plasma nitriding. Mechanism of fast-rate nitriding process is discussed with consideration of the role of Al2Cu precipitates.
Reliable surface treatment has been explored to improve the strength and wear resistance of aluminum alloy parts in automotives. Long duration time as well as long pre-sputtering time are required for plasma nitriding of aluminum or its alloys only with the thickness of a few micrometers. New plasma inner nitriding is proposed to realize the fast-rate nitriding of aluminum alloys. Al-6Cu alloy is employed as a targeting material in order to demonstrate the effectiveness of this plasma nitriding. Mechanism of fast-rate nitriding process is discussed with consideration of the role of Al2Cu precipitates.
出处
《材料热处理学报》
EI
CAS
CSCD
北大核心
2004年第5期334-337,共4页
Transactions of Materials and Heat Treatment
基金
supported in part by the Grand-in-Aid from MEXT with the contract number of#12305047
the national project on the environmentally benign manufacturing from MEXT.
关键词
等离子渗氮
铝合金
沉淀调节
Al2Cu
Plasma nitriding, Aluminum alloys, Aluminum nitride, Precipitaet accommodation, Al_2Cu