期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

梯度增强的弹塑性损伤非局部本构模型研究 被引量：8

Investigation on Gradient-Dependent Nonlocal Constitutive Models for Elasto-Plasticity Coupled With Damage
下载PDF
导出
摘要 　简要介绍了几种主要的梯度增强非局部模型·　基于"能量耗散梯度依赖"原则,在连续介质热力学框架内推导了梯度增强损伤与塑性耦合的本构关系,同时给出了一个基于塑性的损伤模型的梯度依赖本构的具体形式·　在数值计算方面,结合移动最小二乘法和泰勒级数展开方法,建立了损伤场(有限元高斯积分点上)的Laplace值的近似求解格式,分别给出了二维和三维情况下的相关公式·　给出的二维的韧性断裂的梯度依赖损伤塑性的数值应用。 Firstly, typical gradient-dependent nonlocal inelastic models were briefly reviewed. Secondly, based on the principle of 'gradient-dependent energy dissipation', a gradient-dependent constitutive model for plasticity coupled with isotropic damage was presented in the framework of continuum thermodynamics. Numerical scheme for calculation of Laplacian term of damage field with the numerical results obtained by FEM calculation was proposed. Equations have been presented on the basis of Taylor series for both 2-dimensional and 3-dimensional cases respectively. Numerical results have indicated the validity of the proposed gradient-dependent model and corresponding numerical scheme.
作者 沈新普 沈国晓 陈立新 杨璐
机构地区 沈阳工业大学建筑工程学院 太原重型机械学院应用科学系 东北煤田地质局煤层甲烷气开发中心
出处 《应用数学和力学》 EI CSCD 北大核心 2005年第2期201-214,共14页 Applied Mathematics and Mechanics
基金 辽宁省自然科学基金资助项目(2001101023)
关键词 损伤 塑性 非局部 本构模型 梯度增强 damage plasticity nonlocal constitutive model gradient-dependent
分类号 O342 [理学—固体力学]
  • 相关文献

参考文献21

  • 1Belytschko T, Chiang H Y, Plaskacz E. High resolution two-dimensional shear band computations:imperfections and mesh dependence[ J]. Comput Methods Appl Mech Engrg, 1994,137( 1 ): 1-15.
  • 2Besson J, Steglich D, Brocks W. Modeling of crack growth in round bars and plane strain specimens[ J]. Internat J Solids and Structures,2001,38(11): 8259-8284.
  • 3Noll W. Materially uniform simple bodies with inhomogeneities[J].Arch Rational Mech Anal,1967,27( 1 ): 1-32.
  • 4Nedjar B. Elastoplastic-damage modelling including the gradient of damage: formulation and computational aspects[J]. Internat J Solids and Structures ,2001,38(9) :5412-5451.
  • 5Nayroles B, Touzot G, Villon P. Generalizing the finite element method: diffuse approximation and diffuse elements[J]. Comput Mech, 1992,10(3) :519-534.
  • 6Villon P. Contribution à L' optimisation[ D]. These Presentée Pour L' obtention du Grade de Docteur D' état. France:Universtede Technologie de Comp iegne, 1991.
  • 7Belytschko T, Krongauz Y, Organ D, et al. Meshless methods: an overview and recent developments[J]. Comput Methods Appl Mech Engrg,1996,139( 1 ) :3-47.
  • 8Liu W K, Li S, Belytschko T. Moving least square kernel Galerkin method- ( Ⅰ ): Methodology and convergence[J]. Comput Methods Appl Mech Engrg, 1997,143( 1 ): 113-154.
  • 9Aifantis E C. On the role of gradient in the localization of deformation and fracture [ J]. Internat J Engrg Sci, 1992,30(4): 1279-1299.
  • 10Comi C, Perego U. A generalized variable formlation for gradient dependent softening plasticity[J]. Internat J Numer Methods Engrg, 1996,39(6) :3731-3755.

二级参考文献11

  • 1de Borst R, Pamin J, Geers M G D.On coupled gradient-dependent plasticity and damage theories with a view to localization analysis[J].European J Mech, A Solids,1999,18(3):939-962.
  • 2Desoyer T, Hanus J L, Keryvin V. An instability condition of the deformation process in elasto-(visco)-nonlinear materials[J].Mech Res Comm,1998,25(2):437-442.
  • 3Besson J, Steglich D, Brocks W. Modeling of crack growth in round bars and plane strain specimens[J].Internat J Solids and Structures,2001,38(11):8259-8284.
  • 4Brunet M, Morestin F, Walter H. Damage identification for anisotropic sheet-metals using a non～local damage model[A].In:Proceedings of 2002 ASME- Proceedings of the International Mechanical Engineering Congress and Exposition[C].Paper No,IMEGE 2002-33088
  • 5Saanouni K, Forster C, Hatira F B. On the anelastic flow with damage[J].Internat J Dama Mech,1994,3(1):140-169.
  • 6Saanouni K, Chaboche J L, Lesne P M. On the creep crack-growth prediction by a non local damage formulation[J].European J Mech,A Solids,1989,8(2):437-459.
  • 7Saanouni K, Nesnas K, Hammi Y. Damage modelling in metal forming processes[J].Internat J Dama Mech,2000,9(1):196-240.
  • 8Tvergaard V, Needleman A. Analysis of cup-cone fracture in a round tensile bar[J].Acta Metall,1984,32(3):157-169.
  • 9Lemaitre J.A Course on Damage Mechanics[M].Berlin: Springer-Verlag, 1992.
  • 10Kachnov L M.Introduction to Continuum Damage Mechanics[M].The Netherlands:Maritinus Nijhoff Dordrecht,1986.

共引文献4

同被引文献115

引证文献8

二级引证文献41

应用数学和力学
2005年 第2期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部