摘要
本文用低温等离子、液态氧化、电晕、紫外接枝聚合等方法对UHMWPE纤维进行了表面处理 ,并用扫描电镜和XPS对纤维的表面形貌和含氧量作了表征。结果表明 ,经表面处理后UHMWPE纤维表面变得粗糙 ,表面积增大 ,表面含氧量增加。
The surface of UHMWPE fiber was treated by plasma,liquid oxidization,crone and UV grafting.The morphology and oxygen content of the fiber surface were characterized by SEM and XPS.It was found that the fiber surface became rough and the surface area was increased.The oxygen content was also enhanced after surface treatment.
出处
《玻璃钢／复合材料》
CAS
CSCD
北大核心
2005年第1期17-19,36,共4页
Fiber Reinforced Plastics/Composites
基金
航天基金资助项目 (航天科技 [2 0 0 2 ] 2 1 0号 )
