期刊文献+

气氛与压力对制取非晶碳纳米管的影响

原文传递
导出
摘要 采用温控电弧装置,以Co,Ni合金粉末作为催化剂,放电电流为80A,电压为32V,放电时间为5:min,研究了不同气氛、压力及温度对制取非晶碳纳米管的影响,确定了优化参数.在环境温度为600℃时,氢气气氛,真空度约为6.6×104Pa,非晶碳纳米管的产量和纯度(质量分数)都分别达到了6.5 g/h和80%以上,其管径为7-20 nm.
出处 《科学通报》 EI CAS CSCD 北大核心 2004年第23期2394-2396,共3页 Chinese Science Bulletin
  • 相关文献

参考文献8

  • 1Iijima S. Helical microtubules of graphitic carbon. Nature , 1991, 354: 56~58
  • 2Wang W L, Lu WY, Yang S H, et al.. Amorphous-carbon nanotubes: the growth intermediates of graphitic carbon nanotube? Electrochemical Society Proceedings, 1997, 14: 814~824
  • 3Ci L J, Wei B Q, Xu C L, et al. Crystallization behavior of the amorphous carbon nanotubes prepared by the CVD method. Journal of Crystal Growth 2001, 233: 823~828
  • 4Ci L J, Zhu H W, Wei B Q, et al. Annealing amorphous carbon nanotubes for their application in hydrogen storage. Applied Surface Science, 2003, 205: 39~43
  • 5Nishino H, Yamaguchi C, Haruyuki N, et al. Carbon nanotube with amorphous carbon wall: a-CNT. Carbon, 2003, 41: 2165~2167
  • 6Nishino H, Nishida R, Matsui T, et al. Growth of amorphous carbon nanotube from poly(tetrafluoroethylene) and ferrous chloride. Carbon, 2003, 41: 2819~2823
  • 7Liu Y N, Song X L, Zhao T K, et al. Michael H and Fritz P. Amorphous carbon nanotubes produced by a temperature controlled DC arc discharge. Carbon, 2004, 42(8-9): 1852~1855
  • 8柳永宁, 宋小龙. 纳米碳管电滋炉. 中国专利号: ZL01240373.3, 2002

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部