期刊文献+

航空铝合金的发展回顾与展望 被引量:202

A Glimpse at the Development and Application of Aluminum Alloys in Aviation Industry
下载PDF
导出
摘要 铝合金是飞机机体的主要结构用材,其发展应用与飞机的发展息息相关。回顾了国内外航空铝合金的发展历史,对比分析了国内外航空铝合金的研制和应用差距。结合国外最新铝合金和飞机的发展,分析了铝合金的应用情况并提出了航空铝合金下一步的发展方向,指出铝合金仍将作为飞机的主结构材料而广泛使用。 Aluminum alloy is one of the most important materials in aviation industry.Its development his- tory is closely connected with that of aircrafts.The application and development of advanced aluminum alloys in air- craft industry are briefly described in this paper.The gap of aluminum alloy application in aviation industry between China and other edvanced countries is analyzed.Based on the analysis of the application of advanced aluminum alloys to the aircrafts up to the minute,the trend of aeronautical aluminum alloys is put forward and that the aluminum al- loys will continuously be used as the main aeronautical material is pointed out.
出处 《材料导报》 EI CAS CSCD 北大核心 2005年第2期76-80,共5页 Materials Reports
基金 本项目受航空支撑技术"十五"预先研究项目资助 项目编号:41801060502
关键词 航空 飞机 发展历史 机体 铝合金 aluminum alloys aviation application
  • 相关文献

参考文献25

  • 1Heinz A,et al. Recent development in aluminum alloys for aerospace applications. Mater Sci Eng, 2000,A280: 102.
  • 2Staley James T, Liu John,Hunt Warren H Jr. Aluminum alloys for aerostructures. Adv Mater Proc, 1997,10: 17.
  • 3Filatov Y A,et al. New Al-Mg-Sc alloys. Mater Sci Eng,2000,A280:97.
  • 4Wu Y L, Li C G,et al. Microalloying of Sc,Ni and Ce in an advanced Al-Zn-Mg-Cu alloy. Metall Trans, 1999, 30A (4):1017.
  • 5Liu J,Kulak M. A New paradigm in the design of aluminum alloys for aerospace applications. Mater Sci Forum,2000,331-337:127.
  • 6Rogacki J R. Materials for air and space. Adv Mater Proc,2000, (9) :63.
  • 7Bucci R J, Warren C J,et al. Need for new materials in aging aircraft structures. J Aircraft, 2000,37(1) : 122.
  • 8Matsuoka H, Hiros Y, Kishi Y,et al. Experimental study on strengthening mechanism of Al-Zn-Mg-Cu system alloy.J Soc Mat Sci Japan,1997,46(6):655.
  • 9Waterloo G, Hansen V, Gjonnes J, Skjervold S R. Effect of predeformation and presaging at room temperature in Al-Zn-Mg- (Cu,Zr) alloys. Mat Sci Eng, 2001 ,A303: 226.
  • 10Senatorova O G,Frindlyander I N. Influence of machining on residual stresses and properties of superhigh strength B96ц thin elements. Mater Sci Forum, 2002,396-402:1597.

同被引文献1928

引证文献202

二级引证文献1445

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部