摘要
介绍了摩擦提升机用新型摩阻材料的制备及其性能 ,探讨了硫化体系、填料的含量以及耐热树脂对摩阻材料性能的影响。试验证明用硫磺硫化的聚氨酯弹性体具有较高的拉伸强度、撕裂强度和模量 ,并确定了材料的最佳配比 ;添加质量分数为 40 %的矿质纤维提高了弹性体的强度 ,改善了抗蠕变性能 ;通过添加耐热树脂 ,改善了摩阻材料的对热稳定性。研制的新型摩阻材料在有润滑脂条件下摩擦系数高、耐磨性能优异 。
This paper introduced the preparation method of the new friction-resistant material used in the friction elevator and its property.Discussed the effects of the vulcanization system,content of filler and heat-resisting resin on the property of the friction-resistant material.The test proved that the PU elastomer cured by sulfur has high tensile strength,tear strength and mould.It gave the optimum proportion.It can improve the strength and creep-resistance of the elastomer by adding 40% mineral fibre, improve the heat-stability by adding heat-resisting resin.The new friction-resistant material has high frictional coefficiency,and good abrasion performance when the steel wire rope is covered by grease lubricant and meet the demand of the the friction elevator.
出处
《弹性体》
CAS
2004年第6期50-53,共4页
China Elastomerics
基金
重点科技攻关项目