摘要
文章扼要阐述了距离向多孔径接收宽测绘带合成孔径雷达(multi aperture wide swathSyntheticApertureRadar,MAWS SAR)的基本原理,比较了三种距离向多 孔径接收宽测绘带SAR的成像算法A、B、C。算法A是先从混叠信号中分离出每个子 测绘带各自的回波信号,再作距离向压缩;算法B是先作距离向压缩,再分离出每个子 测绘带各自的回波信号;算法C与算法A基本相似,只是分离信号时用了特别定义的 权矩阵。文章对这三种成像算法进行了具体研究,并进而得到了一些结论。
This paper briefly addresses the basic principle of multi aperture wide swath synthetic aperture radar (MAWS SAR) and presents three imaging algorithms of MAWS SAR (namely A、 B and C, respectively). The algorithm A first obtains return signal for each swath from the hybrid signal, then compresses signal in the range direction. The algorithm B first compresses signal in the range direction, then obtains return signal for each swath from the hybrid signal. The algorithm C is similar to algorithm A, only difference between them is to use different weighted matrix for separating return signals. These imaging algorithms are compared and some conclusions are obtained.
出处
《电波科学学报》
EI
CSCD
北大核心
2005年第1期119-124,共6页
Chinese Journal of Radio Science
基金
国家高科技发展计划(No.2002aa135060)
中国科学院百人计划资助
国家自然科学基金资助项目(No.60371004)
关键词
合成孔径雷达
多孔径
宽测绘带
微波成像
synthetic aperture radar, multi-aperture, wide swath, microwave imaging