Mechanism of Explosive Technique on Relieving Welding Residual Stresses
被引量：1
参考文献7
1 Schmidt C and Shockey D 1992 Weld,Res.Suppl.443 s.
2 Zhang K.Xue P J,Liu K S et al 1995 An Approach to the Mechanism of Explosive Eliminating of Residual Stress.Dynamic Plasticity and Structural Behaviors ed Tanimura S J and Khan A S (Baltimore.MD:Gordon and Breach)P 253.
3 Masubuchi K 1980 Analysis of Welded Structures:Residual Stresses,Distortion,and Their Consequences (Boston,MA:Pergamon).
4 Symonds P S 1965 Behaviour of Materials under Impact Loading (New York:ASME)p 106.
5 Liu K X,Zhang J X,Liu Y et al 2004 Chin,J.Appl.Mech.21 10 (in Chinese).
6 Ye X H and Chen X 2002 Chin Phys.Lett.19 788.
7 Shi S Q:Gan S.Wang L L et al 1996 J.Ningbo Univ.3 72 (in Chinese).
同被引文献10
1 刘凯欣,张晋香,刘颖,李晓杰,张凯.爆炸法消除焊接接头残余应力的数值模拟[J] .应用力学学报,2004,21(2):10-15. 被引量：12
2 Changzhong WU Huaining CHEN Jing CHEN Quanhong LIN Jianjun GUAN.Relief of Residual Stresses in 800 MPa Grade High Strength Steel Weldments by Explosion Treatment and its Effect on Mechanical Properties[J] .Journal of Materials Science & Technology,2006,22(3):387-391. 被引量：1
3 张雄,陆明万,王建军.任意拉格朗日-欧拉描述法研究进展[J] .计算力学学报,1997,14(1):91-102. 被引量：104
4 闫德俊,刘雪松,杨建国,方洪渊.有限元分析热物理参量对焊接残余应力峰值特征的影响[J] .焊接学报,2010,31(6):56-60. 被引量：9
5 田洋,李运生,张德莹,戴运良.正交异性板U肋与桥面板焊缝连接的静力及疲劳试验研究[J] .铁道科学与工程学报,2011,8(2):34-39. 被引量：22
6 管建军,陈怀宁.爆炸消除中厚板焊接残余应力工艺数值模拟[J] .焊接学报,2011,32(9):105-108. 被引量：6
7 赵秋,吴冲.U肋加劲板焊接残余应力数值模拟分析[J] .工程力学,2012,29(8):262-268. 被引量：57
8 曹宝雅,丁幼亮.板件厚度对钢桥面板顶板纵肋焊接残余应力的影响分析[J] .东南大学学报（自然科学版）,2016,46(3):565-571. 被引量：17
9 李爱群,司政,邓扬,张萌.钢桥面横隔板与U肋焊接处残余应力场分析[J] .桥梁建设,2019,49(6):36-41. 被引量：19
10 姚成宝,付梅艳,韩峰,闫凯,雷雨.基于多介质Riemann问题的流体-固体耦合数值方法及其在爆炸与冲击问题中的应用[J] .兵工学报,2021,42(2):340-355. 被引量：1
1 Md Mizanur Rahman Markku Lampinen Timo Siikonen.An Improved k-Equation Turbulence Model[J] .Journal of Energy and Power Engineering,2014,8(11):1895-1907.
2 张义弓,刘爱国.TA2/16MnR异种冷金属过渡焊接工艺研究[J] .沈阳理工大学学报,2016,35(6):39-43.
3 Zheng Yuanmou,Huang Rongguang,Chen Shihong.Effect of Annealing on Fly-Line Microstructure and Properties of Explosively Composited Stainless Steel-Stainless Steel Plates[J] .Journal of Iron and Steel Research(International),1999,6(2):39-43.
4 张金民,陈政龙.爆炸焊接的TA1/16MnR板中界面层微观结构[J] .热处理,2014,29(3):69-71.
5 朱伟军,卢文壮,刘杨,董平和,杨波,左敦稳.焊接残余应力引起铣削加工变形的研究[J] .机械制造与自动化,2013(1):39-43.
6 张观军,杨涤心,魏世忠,龙锐.爆炸硬化对高锰钢冲击磨损性能的影响[J] .矿冶工程,2007,27(5):69-72. 被引量：3
7 范钦珊,陈文,张斌.Effect of Welded Residual Stresses on the Fatigue Life of Structural Components in Two-dimensional State[J] .Tsinghua Science and Technology,1997,2(2):20-22.
8 LIU Zhiguang,GUO Jianting,LIGusong,HU Zhuangqi.EFFECT OF Ti-ADDITION ON MECHANICAL ALLOYING OF NiAl[J] .Acta Metallurgica Sinica(English Letters),1994,7(1):7-11.
9 仉传兴,肖汉斌.基于有限元分析钢板焊接温度场的影响因素[J] .机械设计与制造,2008(11):236-238. 被引量：3
10 李继辉.16MnR钢制压力容器埋弧焊工艺[J] .焊接,2004(6):43-44. 被引量：2
