期刊文献+

Preparation, morphology and mechanical properties of acrylate-modified polyurethane/unsaturated polyester resin graft-IPNs 被引量:6

Preparation, morphology and mechanical properties of acrylate-modified polyurethane/unsaturated polyester resin graft-IPNs
下载PDF
导出
摘要 Acrylate modified polyurethane resin was first synthesized, and interpenetrated with unsaturated polyester resin to form IPNs and gradient IPNs which cured at room temperature. The polymerization process was traced by an IR spectroscopy technique and the simultaneous interpenetrating techniques were determined. The morphology of these IPNs were estimated by TMA and TEM methods. The results indicated that large amount of interpenetrating and entanglement make T g linked up effectively, and domains between two phases can be in nanometre ranges, which changed with composition ratios. The mechanical properties results showed that IPNs varied from elastomeric to plastic materials. It was noteworthy that, with the introduction of modified groups and the formation of graft construction in IPNs, the miscibility in the systems was improved a lot. These further led to the improved mechanical properties of IPNs with elastomer reinforced and plasticizer toughened as well. The reinforced miscibility between the networks can apparently change mechanical property especially for the gradient ones when the materials are elongated. Acrylate modified polyurethane resin was first synthesized, and interpenetrated with unsaturated polyester resin to form IPNs and gradient IPNs which cured at room temperature. The polymerization process was traced by an IR spectroscopy technique and the simultaneous interpenetrating techniques were determined. The morphology of these IPNs were estimated by TMA and TEM methods. The results indicated that large amount of interpenetrating and entanglement make T g linked up effectively, and domains between two phases can be in nanometre ranges, which changed with composition ratios. The mechanical properties results showed that IPNs varied from elastomeric to plastic materials. It was noteworthy that, with the introduction of modified groups and the formation of graft construction in IPNs, the miscibility in the systems was improved a lot. These further led to the improved mechanical properties of IPNs with elastomer reinforced and plasticizer toughened as well. The reinforced miscibility between the networks can apparently change mechanical property especially for the gradient ones when the materials are elongated.
出处 《Journal of Harbin Institute of Technology(New Series)》 EI CAS 2003年第1期7-10,共4页 哈尔滨工业大学学报(英文版)
基金 theNaturalScientificResearchFoundationofHeilongjiangProvince(GrantNo.E0 0 -17)
关键词 acrylate modified polyurethane unsaturated polyester resin (UP) interpenetrating polymer networks(IPNs) MORPHOLOGY mechanical property 制备 形态学 机械性质 丙烯酸脂改性聚亚安酯 不饱和聚酯树脂 嫁接 互穿聚合物网络
  • 相关文献

参考文献7

二级参考文献81

共引文献119

同被引文献138

引证文献6

二级引证文献34

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部