期刊文献+

非线性非稳态油膜支撑的密封-转子系统流体激励行为 被引量:3

Airflow-Induction Dynamics of Seal Rotor System with Nonlinear and Unstable Oil Film Supported
下载PDF
导出
摘要 将非线性非稳态油膜力模型与密封流体Muszynska模型结合,对非线性非稳态油膜力支承下的密封-转子系统流体激励行为进行了研究,发现其响应随转速比的变化具有复杂的动力学行为,产生了包括周期、拟周期等丰富的振动现象,具有很强的非线性特征. The model of nonlinear and unstable oil film force was combined with Muszynska mode of seal fluid and the concerned nonlinear dynamics was studied. Complex dynamical responses of airflow-induction are detected with rotary speed variation, which include periodic and quasi-periodic vibrant phenomena with strong nonlinear character.
出处 《上海交通大学学报》 EI CAS CSCD 北大核心 2005年第2期320-323,共4页 Journal of Shanghai Jiaotong University
基金 国家高技术研究发展计划(863)项目(2002AA526013-8) 上海市优秀学科带头人计划资助项目(04XD14012)
关键词 非线性非稳态油膜 密封-转子系统 动力学 数值模拟 Computer simulation Dynamic response Dynamics Mathematical models Nonlinear systems Runge Kutta methods Seals
  • 相关文献

参考文献8

  • 1陈予恕,丁千,侯书军.非线性转子-密封系统的稳定性和 Hopf 分叉[J].振动工程学报,1997,10(3):368-374. 被引量:43
  • 2金琰,袁新.转子密封系统流体激振问题的流固耦合数值研究[J].工程热物理学报,2003,24(3):395-398. 被引量:8
  • 3李松涛,许庆余.迷宫密封—滑动轴承—转子系统的非线性动力稳定性[J].航空学报,2003,24(3):226-229. 被引量:11
  • 4张文 崔升 徐小峰.工程力学进展[M].北京:北京大学出版社,1998.158-167.
  • 5Muszynska A, Bently D E. Anti-swirl arrangements prevent rotor/seal instability[J]. ASME, Journal of Vibration, Acoustics, Stress and Reliability in Design,1989,111:156-162.
  • 6Muszynska A. Improvements in lightly loaded rotor/bearing and rotor/seal models[J]. ASME, Journal of Vibration, Acoustics, Stress and Reliability in Design,1988,110:129-136.
  • 7Muszynska A, Bently D E. Frequency-swept rotating input perturbation techniques and identification of the fluid force models in rotor/bearing/seal systems and fluid handing mechanies [J]. Journal of Sound and Vibration,1990,143(1):103- 124.
  • 8Brewe D E. Theoretical modeling of the vapor cavitation in dynamically loaded journal bearing[J]. Journal of Tribology, 1986,108 (2): 628- 638.

二级参考文献8

共引文献54

同被引文献17

引证文献3

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部