摘要
为了获得不同边界条件下泡沫金属的内耗特征,通过采用动态机械分析仪在不同弯曲模式下对泡沫铝硅合金的内耗进行实验研究。结果表明:泡沫铝硅合金在不同边界条件下的内耗峰出现情况不同,且温度对三点弯曲模式时内耗的频率特性影响最大;三种边界条件下泡沫铝硅合金的内耗的振幅效应基本相似;温度对该材料在三点弯曲模式比单双悬臂梁振动模式下内耗的影响更大。
In this paper, the internal friction of foamed Al-Si alloy(ZL104) in different bending modes was investigated, for getting the characteristics of the internal friction of foamed metal in different boundary conditions. The experimental results show that the internal friction peak of the material in the three conditions appears differently, and the influence of temperature on the characteristics of frequence of internal friction in the 3-Point Bending mode is greatest;the strain-amplitude effects of the three boundary conditions of the material are similar basically;the influence of temperature on the internal friction of the material in 3-Point bending mode is greater than the single and dual bending modes.
出处
《噪声与振动控制》
CSCD
北大核心
2005年第1期40-42,共3页
Noise and Vibration Control
基金
中国航空科学基金资助项目(03G56007)
江西省自然科学基金资助项目(0250039)。
关键词
振动与波
泡沫铝硅合金
边界条件
弯曲模式
内耗峰
vibration and wave
foamed Al-Si alloy
boundary condition
bending mode
internal friction peak