摘要
为了推广膜生物反应器在实际工程中的应用,对平板式膜生物反应器处理药酒厂废水时的启动方式展开探讨。试验采用了三种方式,结果表明通过膜出水,逐渐提高容积负荷的方式,不仅启动最快,而且膜污染较轻,是一种简洁、可行的启动方式。
The optimal starting operation pattern in treating medicine wine wastewater by plate membrane bioreactor was studied to improve the practice of MBR in actual project. Three kinds of starting operation methods were chosen, and results showed that the method that drew outflow from membrane model and increased volume load gradually was the fastest and most suitable pattern with least membrane fouling.
出处
《环境科学与技术》
CAS
CSCD
北大核心
2005年第2期85-87,共3页
Environmental Science & Technology
基金
国家高技术研究发展计划课题资助(863计划)
上海市重点学科建设项目资助(2002AA601220)。
关键词
平板式膜生物反应器
药酒废水
启动方式
容积负荷
plate membrane bioreactor
medicine wine wastewater
starting operation pattern
volume load
