期刊文献+

乳液型丙烯酸树脂改性阳离子淀粉增干强剂的制备及性能 被引量:5

Preparation and Properties of Dry Strength Agents the Acrylate Resin Modified Cationic Starch
下载PDF
导出
摘要 淀粉与阳离子醚化剂在碱性介质和氧化剂存在下 ,搅拌加热至 6 5~ 70℃ ,进行氧化降解和阳离子化反应 ,反应时间为 2h。再加入丙烯酸及丙烯酸酯单体于 80~ 85℃进行接枝共聚 ,m (玉米淀粉 )∶m (改性单体 ) =1 0∶0 8时 ,得到的乳液型丙烯酸树脂接枝共聚阳离子淀粉增干强剂的增强效果最好 ,对增加纸张干强度和耐撕裂度有明显效果 ,用量为绝干浆质量的 0 4%~ 0 .5 %时 ,可使纸的干强度增加 15 %以上 ,耐撕裂度提高 8%以上。并用IR、SEM。 The oxidative degradation and cationization reaction of starch were carried out at 65 - 70 °C for 2 h and then monomers of acrylate were grafted on the starch chain in the ratio m(starch): m(monomers) = 1.0:0.8 at 75 - 80 °C for 2 h. The initiator amounted to 4% - 5% (w/w) of monomers. The grafted cationic starch showed obvious strengthening effect to increase the dry strength and the tearing resistance of paper more than 15% and 8% respectively. The structure and properties of the modified copolymers were characterized by methods of IR, DSC, SEM etc.
出处 《精细化工》 EI CAS CSCD 北大核心 2001年第4期228-231,共4页 Fine Chemicals
基金 "九五"国家攻关项目 !(97-619-0 1-0 4)&&
关键词 增干强剂 阳离子淀粉 接枝共聚 dry strength agent cationic starch graft copolymerization
  • 相关文献

参考文献7

  • 1李承范,康振晋,尹成日.阳离子淀粉的制备及其应用[J].延边大学学报(自然科学版),1997,23(4):32-34. 被引量:11
  • 2[4]Linhart,Friedrich,Stange, etal. Cationic modification of starch and use of the cationically modified starch[P].US:5 851 300,1998- 12-22.
  • 3[5]Guerro,Gerald,et al . Methods and agents for improving paper printability and strength[P].US:5 824 190,1998-10-20.
  • 4[6]Fischer,Stephen A,Clungeon, et al. Method for enhancing paper strength[P] .US:5 382 324,1995-01 - 17.
  • 5[7]Stange,Andreas,Degen, et al.Making PaPer,board and cardboard of high dry strength[P]. US:4 940 514,1990 - 07 - 10.
  • 6[8]Deers, Gary L, Tamalis, et al. Cationic grafted starch copolymers ashigh - strength paper additives[P]. US:4 744 864, 1988 - 05 - 17.
  • 7[9]Deets,Gary L,Tamalis, et al.Cationic grafted copolymers[P],US:4 684 708, 1987- 06 - 04.

共引文献10

同被引文献44

引证文献5

二级引证文献39

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部