摘要
To meet the demands of processing residue with high sulfur content, Fushun Research Institute of Petroleum and Petrochemicals (FRIPP) successfully developed the fixed bed residue hydrotreating technology (S RHT), which is suitable for treating high sulfur residue to produce diesel oil with low sulfur content. the hydrotreated 350 ℃+ residue is also a good feedstock for RFCC. Based on this technology, Maoming Petrochemical Company constructed the hydrotreating unit with a capacity of 2 Mt/a to treat high sulfur residue, in which loaded FZC series catalysts were developed by FRIPP. The unit was first put into commercial operation at the end of 1999. The commercial operation showed that the catalysts have good activities and the products meet the designed specifications.
To meet the demands of processing residue with high sulfur content, Fushun Research Institute of Petroleum and Petrochemicals (FRIPP) successfully developed the fixed bed residue hydrotreating technology (S RHT), which is suitable for treating high sulfur residue to produce diesel oil with low sulfur content. the hydrotreated 350 ℃+ residue is also a good feedstock for RFCC. Based on this technology, Maoming Petrochemical Company constructed the hydrotreating unit with a capacity of 2 Mt/a to treat high sulfur residue, in which loaded FZC series catalysts were developed by FRIPP. The unit was first put into commercial operation at the end of 1999. The commercial operation showed that the catalysts have good activities and the products meet the designed specifications.
出处
《石油学报（石油加工）》
EI
CAS
CSCD
北大核心
2001年第1期14-17,共4页
Acta Petrolei Sinica(Petroleum Processing Section)
