期刊文献+

Microbial Degradation of Aniline by Bacterial Consortium

Microbial Degradation of Aniline by Bacterial Consortium
下载PDF
导出
摘要 Objective To investigate the characteristics of microbial degradation of aniline by a stable bacterial consortium. Methods The bacterial consortium was isolated from activated sludge treating chemical wastewater using aniline as the sole source of carbon and nitrogen by enrichment and isolation technique. The biomass was measured as optical density (OD) at 510 run using a spectrophotometer. Aniline concentrations were determined by spectrophotometer. The intermediates of aniline degradation were identified by GC/MS method. Results The bacterial consortium could grow at a range of aniline concentrations between 50 and 500 mg/L. The optimal pH and temperature for aniline degradation were determined to be 7.0 and 30, respectively. The presence of NH4NO3 as an additional nitrogen source (100-500 mg/L) had no adverse effect on bacterial growth and aniline degradation. The presence of heavy metal ions, such as Co2+, Zn2+, Ni2+, Mn2+ and Cu2+ had an inhibitory effect on aniline degradation. Conclusions The isolated bacterial consortium can degrade aniline up to 500 mg/L effectively and tolerate some heavy metal ions that commonly exist in chemical wastewater. It has a potential to be applied in the practical treatment of aniline-containing wastewater. Objective To investigate the characteristics of microbial degradation of aniline by a stable bacterial consortium. Methods The bacterial consortium was isolated from activated sludge treating chemical wastewater using aniline as the sole source of carbon and nitrogen by enrichment and isolation technique. The biomass was measured as optical density (OD) at 510 run using a spectrophotometer. Aniline concentrations were determined by spectrophotometer. The intermediates of aniline degradation were identified by GC/MS method. Results The bacterial consortium could grow at a range of aniline concentrations between 50 and 500 mg/L. The optimal pH and temperature for aniline degradation were determined to be 7.0 and 30, respectively. The presence of NH4NO3 as an additional nitrogen source (100-500 mg/L) had no adverse effect on bacterial growth and aniline degradation. The presence of heavy metal ions, such as Co2+, Zn2+, Ni2+, Mn2+ and Cu2+ had an inhibitory effect on aniline degradation. Conclusions The isolated bacterial consortium can degrade aniline up to 500 mg/L effectively and tolerate some heavy metal ions that commonly exist in chemical wastewater. It has a potential to be applied in the practical treatment of aniline-containing wastewater.
出处 《Biomedical and Environmental Sciences》 SCIE CAS CSCD 2003年第4期398-404,共7页 生物医学与环境科学(英文版)
基金 The work was supported by the National Natural Science Foundation of China (Grant No. 29637010)
关键词 ANILINE Priority pollutant BIODEGRADATION Wastewater treatment Aniline Priority pollutant Biodegradation Wastewater treatment
  • 相关文献

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部