期刊文献+

连续激光作用下金属表面合金化的动态凝固特征 被引量:1

Dynamical Solidification Characteristic of Metal Surface Alloying by Action of Continuous Laser
下载PDF
导出
摘要 研究了激光表面合金化的动态特征。在实验的基础上讨论了激光合金化的凝固组织特征及其形核机制,分析了运动熔池形状效应对凝固特征的影响。实验表明其动态凝固特征主要受控于激光合金化工艺参数和熔池形状特征等的综合作用。另一方面,激光合金化的凝固形核机制主要为异质外延形核和非均匀形核。 The solidification microstructures and their nucleation models are discussed,and the effect of the shape effect of moving melton pool on the solidification features is anslyzed on the basis of experiments. The experimental results show that its solidification behavior is complex,because the continuous laser alloying is a dynamical process. The reason for this complexity is that the dynamical solidification characteristic is significantly controlled by the laser alloying parameters and the molten pool shape. On the other hand,the solidification structures of laser alloying have a series of specialities,and their nucleation mechanisms are mainly heteroepitaxial growth and heterogeneous nucleation growth.
作者 刘江龙
出处 《重庆大学学报(自然科学版)》 EI CAS CSCD 1993年第3期65-70,共6页 Journal of Chongqing University
关键词 激光加热 表面 合金化 金属 laser heating laser application surface alloying solidifying phase microstructure
  • 相关文献

参考文献3

  • 1Chen J C,Int J Heat Mass Transfer,1991年,34卷,3期,663页
  • 2刘江龙,Key Eng Mat,1990年,46/47卷,265页
  • 3梁勇,金属学报,1990年,26卷,2期,B114页

同被引文献7

  • 1SIMCHI A,PETZOLDT F,POHL H.Direct metal laser sintering:Material considerations and mechanisms of particle bonding[J].Intern J Powder Metal,2001,37(2):49-61.
  • 2GU Dong-dong,SHEN Yi-fu.Numerical simulation of temperature field in direct metal laser sintering process[J].Trans Nanjing Univ Aero & Astro,2004,21(3):225-233.
  • 3KAMATCHI S,NEAL V,JOEL B,et al.Selective laser sintering of alumina with polymer binders[J].Rapid Prototyping J,1995,1(2):24-35.
  • 4SHEN Yi-fu,CHEN Ji-zhi,FENG Zhong-chao,et al.Distribution and behaviour of rare earths in laser oating[J].J Rare Earths,1998,16(3):178-183.
  • 5张建华,赵剑峰,余承业,吴晓莉.模具模腔的一种快速制造方法[J].机械科学与技术,2001,20(3):419-420. 被引量:8
  • 6张剑峰,沈以赴,赵剑峰,黄因慧,余承业.Ni基金属粉末激光快速制造的研究[J].航空学报,2002,23(3):221-225. 被引量:23
  • 7张剑峰,管荣根,沈以赴,赵剑峰,黄因慧.金属粉末激光选区烧结过程的特征探讨[J].东南大学学报(自然科学版),2004,34(1):54-57. 被引量:13

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部