摘要
研究了用低铬白口铸铁制作的φ8mm小型磨球的组织与性能,以取代广泛使用的同种规格的轴承钢磨球.结果表明,这种小型铸铁磨球的硬度达HRC62—66,比轴承钢磨球高约3个硬度单位,冲击疲劳寿命比轴承钢球高2~3倍,在干磨和湿磨两种三体磨损条件下,相对抗磨性指数分别达到0.97和0.85,而售价约可下降1/3.
The structure and properties of ф8mm small mill balls were investigated with low-chromium white cast iron which was used to replace bearing steel balls. The results of experiments shows that higher hardness (HRC 62~66)
is achieved for the small cast iron mill balls, its service life of impact fatigue is higher than that of bearing steel by 2 - 3 times, the relative abrasion-resistance index of low-chromium cast iron mill 'balls is 0.97 and 0.85 under dry and wet abrasion conditions respectively, but the selling price can be reduced one third.
出处
《铸造》
CAS
CSCD
北大核心
1993年第6期16-20,共5页
Foundry