期刊文献+

高固羧基丁苯胶乳的工艺开发 被引量:3

TECHNOLOGICAL DEVELOPMENT FOR SYNTHESIS OF HIGH SOLID CONTENT CARBOXYLATED BUTADINE-STYRENE RUBBER LATEX
下载PDF
导出
摘要 分别在实验室、中试和工业试验装置上,用低皂乳液聚合法在高温.高转化下,采用分批间歇加料方式合成了地毯海绵背衬用高固羧基丁幕胶乳,考察了乳化剂,引发剂、羧酸和调节剂等对聚合反应的影响。中试开发了汽提法脱除未反应单体工艺和强制外循环釜式加热法胶乳浓缩处理技术。通过聚合-浓缩法或直接合成法,均可制得残留苯乙烯低于200×10^(-6)、总固含量高于56%的产品胶乳。 On the respective experimental ,pilot and commercial scales , the high solid content carboxylated butadiene-styrene rubber latex for carpet foam-backing coating was synthesized by the batch process in low-soap emulsion polymerization with multi- feeding at elevated temperature and high conversion of monomer . The effects of emulifier , initiator , carboxylated acid and modifier upon polymerization were investigated . The stripping process for removal of unreacted monomers ,and the latex concentration treatment technology in which the concentrationapparatus involved a stirred-tank as heat exchanger and a circulation flow system were developed under pilot test. The product latex with residual styrene less than 200 × 10-6 and total solid content more than 56% could be obtained by either of polymerization-concentration process and direct synthesis process .
出处 《合成橡胶工业》 CAS CSCD 北大核心 1993年第2期82-86,共5页 China Synthetic Rubber Industry
关键词 羧基 丁苯胶乳 丁苯橡胶 carboxylated butadiene-styrene rubber latex high solid content latex emulsion polymerization carpet foam-backing technical developmenet
  • 相关文献

同被引文献5

  • 1佚名.万吨级SIS工业化技术[J].合成橡胶工业,1996,19(5):294-294.
  • 2李万宝.乳液丁苯橡胶技术开发通过鉴定[J].合成橡胶工业,1994,17(3):156-156.
  • 3佚名.万吨级热塑性丁苯橡胶成套技术通过鉴定和竣工验收[J].合成橡胶工业,1992,15(2):108-108.
  • 4佚名.LCBR工业试验获得成功[J].合成橡胶工业,1996,19(5):296-296.
  • 5佚名.羧基丁苯胶乳荣获国家科技进步三等奖[J].合成橡胶工业,1993,16(2):141-141.

引证文献3

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部